28 mm Handlebars RAM Mount (adapter)

thingiverse

ITA - part_A_with_2_mm_rubber e part_B_with_2_mm_rubber: if you want to print two pieces overlapping one 2 mm rubber piece (like my photos). - part_A_without_rubber e part_B_without_rubber: if you don't want to use rubber and mount directly on the handlebar. To complete the work, you need: - 5 M5 bolts (better self-locking); - 5 M5X50 mm screws (preferably made of steel so they won't rust); - RAM support: http://fave.co/2hvZTu9 If you don't want to spend money on the RAM support, you can try printing the ball version. It must be placed in the plate like my photo shows. After printing the two parts, apply glue and mix them together. ENG - part_A_with_2_mm_rubber and part_B_with_2_mm_rubber: if you want to use 2 mm rubber like me (see my shots). - part_A_without_rubber and part_B_without_rubber: if you do not want to use any rubber. To complete the work, you need: - 5 M5 bolts; - 5 M5X50 mm screws; - RAM support: http://fave.co/2hvZTu9 If you don't want to buy the ram support, you can try printing the ball version. It must be placed in the plate like my photo shows. After printing the two parts, apply glue and mix them together.