25mm to 10mm hose adapter
thingiverse
Customized version of http://www.thingiverse.com/thing:44850 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44850 Instructions Using the following options: Cone 2 Height is set at twenty millimeters. Cone 1 Height is also set at twenty millimeters. Wall Thickness of Cone 2 is set at three millimeters. Barb Spacing Ratio is doubled to two times its standard setting. Barb Flatness Ratio is doubled as well, reaching a ratio of two to one. Conical Barb Width on the second cone is set at point eight millimeters. Maximum Diameter of Cone 2 is twenty-five millimeters, while Minimum Diameter remains at twenty-five millimeters. The Skew Angle for Barbs is adjusted to fifteen percent. Joining Height between cones is established at three millimeters. Barb Width on the first cone is also set at point eight millimeters. A thorough inspection of internal cavities is skipped in this version. Cone 1 Maximum Diameter is limited to ten millimeters, matching its Minimum Diameter setting. Wall Thickness of Cone 1 remains at two millimeters.
With this file you will be able to print 25mm to 10mm hose adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 25mm to 10mm hose adapter.