25mm fan adapter to 40mm fan mount

prusaprinters

<p>Adapter to allow a 25mm fan to be mounted as if a 40mm fan. Helpful for mounting a Raspberry PI 4 Case Fan with PWM to a non official Raspberry PI case that would normally use a 40mm fan.</p> <p>Used supports from the bed for the nut mounts. No other support necessary to print. Used existing 3mm screws and nuts to mount.</p> <p>You will need to remove the Dupont connector while you push the wires through the hole. But that is pretty easy. Makes for a very clean install.</p> <h3>Print Settings</h3> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Notes:</strong></p> <p>Supports are only necessary from the bed and only for the nut holders. Let me know if you have any idea on how to design without needing any support.</p> <h3>Post-Printing</h3> <p>Just some slight clean up around the nut holders</p> <h3>How I Designed This</h3> <p>Fusion 360</p> </p> Category: Electronics