24mm Wrench

prusaprinters

<p>I needed a 24mm wrench, so I designed a simple yet functional wrench. The size indication is only "engraved" on one side, as bed adhesion would be tricky if it was done on both sides.</p><p>Use relatively high perimeter count, bottom layers, top layers and infill percentage,<br>as those are the main parameters influencing the strength of the wrench.</p><p>This wrench should be printable on pretty much any 3D printer with a common bed size.</p><p><strong>Support</strong></p><p>If you'd like to support me for the 3D models I distribute for free, you can use the following AliExpress affiliate link: <a href="https://s.click.aliexpress.com/e/_AoUC8h">https://s.click.aliexpress.com/e/_AoUC8h</a></p><p>Whenever you buy something through this link, I get a small kickback without costs for you :)</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong> Anycubic</p><p><strong>Printer:</strong> All-metal Mega</p><p><strong>Rafts:</strong> No</p><p><strong>Supports:</strong> No</p><p><strong>Resolution:</strong> 0.2mm</p><p><strong>Infill:</strong> 20%</p><p><strong>Filament:</strong> ColorFabb nGen Gray Metallic<br><strong>Notes:</strong></p><p>I used 4 perimeters, 4 bottom layers, 4 top layers with a 20% honeycomb infill pattern.<br>First layer temperature was 225C, with all the other layers printed at 220C. The heated<br>bed had a temperature of 80C throughout the whole print. Parts cooling fan was turned off.</p>