22mm HOSE CONNECTOR with BMP280 BAROMETRIC PRESSURE ADAPTER
thingiverse
22mm CONNECTOR with PRESSURE SENSOR ADAPTER Designed to be mounted on the line connecting the ventilator and the patient. One type is designed for BMP280 BAROMETRIC PRESSURE 30 X 22 mm, found at https://wiki.dfrobot.com/Gravity_BMP280_Barometric_Pressure_Sensors_SKU_SEN0251. A filament 3D printer will print better results with the Y type, while a resin printer can produce both types. All parts are designed to be printed without support using a 3D printer. Cables will be removed through the 3mm hole in the housing and sealed afterwards with hot glue. Teflon tape is used to seal threads. Clean, wash, and sanitize all parts before use. This design has not been tested or medically approved; it should only be used as a last resort. Stay safe and be safe!
With this file you will be able to print 22mm HOSE CONNECTOR with BMP280 BAROMETRIC PRESSURE ADAPTER with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 22mm HOSE CONNECTOR with BMP280 BAROMETRIC PRESSURE ADAPTER.