22mm CONNECTOR with PRESSURE SENSOR ADAPTER

thingiverse

Human: Connector with Pressure Sensor Adapter 22mm Designed to be mounted on the line connecting the ventilator and patient. One is designed for BMP280 - Module dimensions of 15.2 x 12 mm. https://arduino-shop.eu/arduino-platform/1488-iic-i2c-pressure-sensor-and-the-temperature-of-the-bmp280-33-v.html, and the other for BMP280 - 21 X 19 mm model. If your sensor differs, just let us know, and we will design one to fit your needs! Requires a 12.5 -13 mm rubber plug - design space is 12mm - that plug must enter forced in position; and the other one 20.5 -21mm. A filament 3d printer prints better the Y type, the resin can print both types. All parts can be 3D printed. All parts are designed to be printed without support. All parts are in right position to be printed - except for the NUT; what looks like we forgot to flip! Strongly recommend printing at 100% infill! And a flow of 108 - 110% is recommended. Recommend using a PUNCH HOLES cutter 13mm to cut the parts from a 10mm rubber sheet. Make central hole based on your sensor cable diameter. This design was not tested and was not medically approved. Use it as last resort! Be Safe! Stay Safe!