22 mm tent pole (AC Infinity) to 1/2" PVC holder for SCROG net
prusaprinters
SCROG net holder designed for 22 mm grow tent poles like on AC Infinity tents. Holds two pieces of SCH 40 ½" PVC pipe at a 90 degree angle. Printed in ABS with no supports & 20% infill and holds very strong. Should print well in PETG also. Inspired by 3DJunkPile's model but redesigned from scratch in Fusion. You can find the original here: https://www.printables.com/model/244929-16mm-or-19mm-tent-pole-to-22mm-pvc-holder-for-scroUpdated 6/14/24: Version 2: Much stronger than v1. Thicker walls with sharp 90 degree corners removed. Prints at 45 degrees so the layer lines don't run parallel to either the PVC pipe or the tent pole for extra strength. Print with 3-6 walls and 15-20% infill. No supports, the model has supports included. If you have trouble with the included supports not connecting when slicing go to Print Settings > Advanced > Slicing and set Slicing gap closing radius to 0.2 from the default of 0.049. Not connected (Slicing gap closing radius: 0.049): Connected (Slicing gap closing radius: 0.2): Updated 7/15/24: Added 20mm version
With this file you will be able to print 22 mm tent pole (AC Infinity) to 1/2" PVC holder for SCROG net with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 22 mm tent pole (AC Infinity) to 1/2" PVC holder for SCROG net.