22 gram Giant Glue stick holder
thingiverse
Elmers school stick glue stick holders, the giant ones, weigh in at 22 grams each.\nPrint Settings\nPrinter Brand: Robo 3D\nPrinter Model: R1 ABS + PLA\nRafts: Not necessary\nSupports: Optional\nInfill: Set to 25%\nNotes: When printing these thin-walled glue stick holders, I recommend a high infill setting to ensure strength. Supports are not required but can be used if desired; if so, leave an air gap of three to four layers between the support and the model. Print at 0.2 layer height or your preferred speed. For ABS, print at 235°C with a speed of 60mm/s, except for the first layer which should be printed at 30mm/s, and the gap printing phase at 100mm/s.
With this file you will be able to print 22 gram Giant Glue stick holder with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 22 gram Giant Glue stick holder.