20w to 100w LED Spot - Round Box Version 2

thingiverse

Added the pole mount I built for this light. Choose your infill, I recommend at least 30% minimum. ---------------------------------------------------25/9/17 10 pm --------------------------------------------------- This is the second version of my round spotlight, smaller and easier to assemble. I printed it in ABS and so far have no complaints. Note that the front panel will get very hot during use, so use ABS or PETG. This one is a 50w spot in the images. The power connector is an XT60 and the power switch is a Rocker 6A 230VAC SPST Locking with a body size of 17 x 12 x 13mm. The fan is a deepcool 80mm x 80mm x 25mm fan. The heatsink I got from a local seller is 80mm x 78mm x 15mm. Items needed for assembly: 2 M3 x 20 self-tappers to lock the electronics assembly to the round case. 2 M6 x 65 threaded rods, which I used to hold the assembly together during build. I used a 6mm tap to create thread in the front panel where these bolts go into. 4 M3 x 10 nuts & Bolts for mounting the electronics. 4 M3 x 12 self-tappers for the last panel to close the box. I used M6 nuts and bolts for the stand mount and clamp 4 M3 x 40 bolts and 4 lock nuts for the barn boards. 2 M3 x 16 bolts or self-tappers to fix the barn doors to the front panel. You need to print two of each barn door. Two are shorter and fit on the higher mount on the ring.