20mm water pipe 1/4" camera mount

thingiverse

This 20mm water pipe camera collar boasts a standard 1/4 inch camera mount. The collar on the pipe provides sufficient tension to keep gravity at bay, but still allows for easy hand movement. It is used in the A2 lightbox corelines. Check out this link: http://www.instructables.com/id/A2-overhead-corner-LEDs-lightbox/ Instructions: Print off one each of the individual parts. Attach the dslr_collar.STL to the dslr_bracket.STL using two 20mm long M3 machine screws with washers and nuts. Insert a 15mm long 1/4 inch hex bolt into the dslr_mount_3.STL, ensuring flush faces. Then, thread the hex bolt into the dslr_mount_1.STL until the disc fits snugly in the cavity. Next, attach the enclosed mount by securing the dslr_mount_2.STL to the dslr_mount_1.STL using four 12mm long M3 machine screws with nuts. Finally, join the dslr_bracket.STL to the enclosed mount using two 20mm long M3 machine screws with washers and nuts. Hardware Needed: - Four 20mm long M3 machine screws - Four 12mm long M3 machine screws - Eight M3 washers - Eight M3 nuts - One 1/4 inch Hex bolt, 15mm long For the pipe: Get a Holman 20mm x 3m press-class 12 PVC pipe from Bunnings at this link: http://www.bunnings.com.au/holman-20mm-x-3m-press-class-12-pvc-pipe-_p4750039