2060 Extrusion mount for Logitech C270 Camera

thingiverse

What it is: ======== Its a webcam mount for X-Axis attachment to the 2060 extrusion - this mount cleverly positions the camera at the right position and height of the print head and will raise as the Z axis raises. Remixed: ======== I got the inspiration for this mount from DerBrinkman on Thingiverse: https://www.thingiverse.com/thing:4098521 but I wanted a different attachment than the M5 bolt his approach required. So i remixed the arm to use a 2060 endcap attachment instead - it is a friction fit requiring no tools but it fits pretty securely on my Artillery Genius Pro. Other slight changes are i used a hot melt M3 insert in the end for camera attachment with a M3x20 hex head bolt. I had these hot melt inserts on hand and its a bit easier for me than dealing with unretained M3 hex nuts. The focusing attachment for the camera itself is merely a make of this excellent design: https://www.thingiverse.com/thing:3081838 from Codiac2600 Setup for printing: ========= I sliced with Cura using Standard Quality 0.2 resolution with a profile optimized for my printer and setup. Rafts no. Supports yes, two small tree supports for the backside of the 2060 endcap part of the model Printed with 15-20% infill. Notes: ======== This was purpose designed for use on an Artillery Genius Pro but i would guess it would work for any printer using 2060 extrusion on the X Axis. The end cap design eliminates a bottom and backside “peg” from the facing edge because on my printer those two small areas are used by the z axis roller assembly. Credits: ======== Sidewinder X1 Logitech C270 Webcam mount by DerBrinkmann https://www.thingiverse.com/thing:4098521 Improved Logitech c270 Manual Focus System by codiac2600 https://www.thingiverse.com/thing:3081838