2040 V-slot extrusion rail(250mm)

cults3d

I've had great success printing tall Prints with this addon/upgrade to my Printer. 2040 v-slot Extrusion rail (250mm) in length. This will add an extra 250mm to ur z axis build volume. CAUTION Specific print settings are required. Read print setting for more detail. Use connector peice to securely connect v-slot Extrusion rails in place. May need to use a malet or hammer and use alittle glue to secure the 2 Extrusion rails together Tightly. If the connector is too far down the metal Extrusion rail may need to use a blowtorch or lighter to melt to get it out. Place 11MM in the stock Extrusion rail. Sand down the end of the Extrusion rail seam closest to the stock metal rail for smooth travel against the Z axis. WARNING. If your printer does not exceed 250 MMM stock this will not fit on your printer. Print vertically for no supports. WARNING if you do not have a lead screw of 600 MM this will do no good adding to ur printer as shown in the pictures. If you do have a lead screw of 600 mm you this setup will ot work due to the stock lead screw being to short.