2020 Extrusion LED Light Mount

prusaprinters

A simple mount to hold a LED light strip at a 35 degree angle to a 2020 aluminum extrusion. Zip tie holes included.AMAZON LINK TO LED LIGHTS [the exact ones this was designed for]I'm sure this can be adapted to hold other such type lights, I'm not really sure. But I figured I'd throw this out there.I designed it to mount to the back extrusion of my Voron Trident facing down towards the build plate. To mount: Use either a spring loaded m3 nut, or a hammerhead nut. Then using a M3x35 screw, and a washer to attach to the extrusion. [You may need to use a few washers to adjust the screw length shorter incase its bottoming out.To insert the light this was designed around you need to slide it in from the side, not force it in from the front. there's a lip built in to keep it from falling out.I included some zip-tie holes to help work with different types of lights, or if you just want the extra security.Use a little bit of double sided tape to help keep the light stable, as well. VHB tape can negate the zip-ties all together.