2020 Bearing 90 Degree Filament Guide Version 2.5

prusaprinters

<p>This is a roller bearing filament guide that clips on to 2020 extrusion and should work with any printer that uses 2020 extrusion. This is designed so that if your X gantry is raised all the way up it will not block it.</p> <p>This version uses a press on wheel from the "Ender 3 Filament Roller Guide". You can use it with or without the wheel. The wheel comes in two sizes regular and small to account for various size bearings.</p> <p>Hardware: You will need 1 608 bearing, either 1 each M3 or M4 x 12mm screw and 1 each M3 or M4 nylock nut. Leave the nylock nut loose enough to allow the guide to swivel.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Adimlab i3 Gantry</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div> <p><strong>Infill:</strong></p> <p>15%-25%</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I printed two at the same time so I added all the parts twice and printed with a brim. Worked very well. I printed mine with 22% infill.</p> Print with support everywhere. </div></p></p> Category: 3D Printer Accessories