2015 Jeep WK2 Switch Panel Engine Bay Mounting Bracket

thingiverse

This is a relay and fuse box mounting bracket for an AutoPowerPlus 6 gang switch. With some modification this will probably work with many similar pod controller boxes. This mount will connect to the power distribution center assembly (fuse box) in the engine bay using 2 M6x1 bolts for the bracket to vehicle mount and 2 M6x1x20 bolts with 2 M6x1 nuts for the pod to bracket mount. There are 2 threaded holes at the top of the power distribution center block that can be used to mount the bracket to the vehicle. The pod box will mount forward of the fuse box, between it and the radiator fill/overflow tank. I've included the .stl file so it can be modified to fit into either an additional location or for variations between years/models. I used 50% infill but I have not road tested it yet with the pod attached so more infill might be required and I'm not sure how hot the part will get. I will be testing over the next few days and update here. This was created in Tinkercad and sliced with Ultimaker Cura 4.9.0.