200mm Drone Frame Vertical Stretch V3

prusaprinters

<p>Vertical 200mm Quad Frame. Using PTEG frame Weighs 73 grams not including Hardware. Uses 5" props and 2000 series Motors. Print 2 Side Frames, do not mirror, Bolt together with 2- 3mm x .5 x 35mm Socket Screw with 3mm and 4- 3mm x .5 x 8mm Screw. Press in 6- 3mm nuts. Please post comments or ideas.</p> <p>This is an untested design, I will gladly share Fusion360 file. Design could actually be printed in one piece on newer printers, I did in sections so if one arm gets broken it could be replaced. Thanks</p> <h3> Print Settings</h3> <p><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>.2</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>25%</p></div></p> <p><strong>Notes:</strong></p> <p>PTEG or ABS 1.75mm bottom and top layer, 2mm walls</p> </p></p> Category: R/C Vehicles