20° Angled Kitchen Towel Holder V2 (using 3M Command Strips) with STEP file

prusaprinters

<p>This is a pretty simple towel holder which was the result of a few suggestions on a prior version I remixed from MSCreations towel holder here (<a href="https://www.thingiverse.com/thing:3601219">https://www.thingiverse.com/thing:3601219</a>). This version is not a remix, but definitely has some inspiration from that model.</p> <p>Features:</p> <ul> <li>The towel holder is angled 20° to the right which is meant to keep the towel a bit tighter together since in my kitchen there are too many places it can get caught in.</li> <li>Towel "hold-back" is optional but intended to keep the towel away from drawers (or in my case a dishwasher and oven). </li> <li>Both parts mount using 3M command strips (model Large / 17023P-ES) - they need to be trimmed down just a bit.</li> <li>The included towel holder faces right so if you need it to face left, please mirror it in the slicer.</li> <li><p>The towel "hold back" is meant to go on the left side so if you want to use it on the right, please mirror it.</p> <h3>If you have little ones, I do not recommend using these since they could get their fingers pinched or stuck. In any case, this is a make / use it at your own risk thing.</h3> <p>Areas for improvement (I don't plan any updates at this time however, but feel free to remix it):</p> </li> <li><p>The hold-back part is not perfect and could probably be a bit longer but I did not want it sticking out more than it was and I consider it to be optional. If you like it, please click the heart, and if you make one, please post a make. The STEP file is included for easy remixing.</p> <h3>Print Settings</h3> </li> </ul> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>0.2mm</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>20% gyroid</p></div><br/> <strong>Filament:</strong><br/> Duramic PETG white <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I used PETG since it will be cleaned with chemical cleaners.</p> When printing, I suggest rotating the hold-back part 15° so the slanted side (top) can sit on the bed. That will allow printing without supports and has the added benefit of making it a bit stronger. The towel holder itself can be printed upright without supports.</div></p> </p></p></p> Category: Kitchen &amp; Dining