2" round T-slot shelf

thingiverse

Designed to fit a 2" Diameter round T-slot rail common in offices for dividers. The design uses a carrier and mount to sandwich a piece of material to serve as a shelf. 2x 3mx20mm pan head bolts and accompanying square nuts to secure. I used a 1/8" thick 12" x 8" piece of aluminum with beveled edges for the shelf itself. Each point of contact was roughed with coarse sand paper and affixed using epoxy. The shelf itself is quite secure but careful not to over load with heavy items. *added original shelf bracket, can be used for the top (shelf part 2) and/or bottom. Instructions Printed with a Duplicator 4 in PLA -Use prt1B as the carrier (qty2) -Use prt2 as the top or bottom bracket -Use prt3 as the top or bottom bracket Use epoxy to affix the shelf to the brackets, rough each mating face with coarse sand paper. I found it easiest to apply epoxy while everything was mounted to the t-slot itself.