2 MM Wider BL Touch Wing for Dual Lightweight 5015 Duct Gen 3

thingiverse

I finally got all the other parts printed(I had to modify the holes for attaching the dual ducts to the base) and when assembling everything, this wing hits the mount where the end stop is, preventing it from engaging with the end stop. Therefore, don't use this setup. I printed: Hero_Me_Base_for_CR-10s_and_Ender_3_Gen3a Hero_Me_lightweight_Dual_5015_Ducts_Gen3 BLTouch_adj_mount_dual_fan_-_Gen2a and BLTouch_Wing_Dual_fan_Ender_5_Gen3 - Unfortunately, I couldn't find one specifically designed for the Ender 3. When attempting to put everything together, the adjustable mount wouldn't fit with the left fan duct in place. It would hit the fan duct and not slide into the channels. So, I extended the left edge of the wing by 2mm and moved the mounting channels and screw hole over by 2mm on the wing. It seems that 1.5 mm might have been enough, but I chose 2 mm to be safe. I'm unsure what the purpose of the rectangular hole on the wing is, so I slid it over by 2mm as well. Possibly, I don't fully comprehend all these components, and a different setup would work with the dual lightweight 5015 ducts. However, this is all I could figure out. As this design is still in progress, it's likely that this issue will be addressed at some point. I've included the skp file as well. Hopefully, this will help someone who wants to use the lightweight dual 5015 ducts. It looks like 8 people downloaded this already. I just realized that I initially uploaded the wrong files by mistake. For some reason, the hole printed larger than it appeared on the prepare screen in Cura(I've since learned to check the preview screen). I fixed this issue by adding more lines to the extension on that side of the hole in the modeling software and printing it again successfully. However, I accidentally uploaded the old file first. Sorry to anyone who might have tried to print this already. I've uploaded the correct files now.