2 functional coaster-phone stand
prusaprinters
Hi!Did you watch youtube by your phone, and rested it on the jar or on kethup what ever? At least I did.Because of this I designed smartphone holder integrated into coaster.You're welcome!Material: ASA. This you need if you want to use it for boiled wather. PETG will work as well, but ASA (IMO) is better because it feels nicer in hand when you hold it and it less sliding on the table.If you want to use it for cold or room temp. stuff, PLA will work fine.Settings I use:layer high: 0,24 mm,wall thickness: 1,2 mm,top / bottom layers: 3, infill: 10%, grid,Support: no.Small phone holder.Settings I use:Material: ASA, PETG, PLA. Depend from you.layer high: 0,16 mm or 0,2 mmwall thickness: 1,2 mmtop / bottom laters: 3infill: 0%Support: no, but watch out for placement on the printing table. There are 2 different, angeled parts in order to fit to into base part when they are collaps.Hinge is made from 1,75 mm filament wire, around 35 mm each.
With this file you will be able to print 2 functional coaster-phone stand with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 2 functional coaster-phone stand.