2.5" HDD housing

prusaprinters

<p>Simple housing for 2, 5 or 10 pieces 2.5" USB HDDs taken from the original housing for better cooling. Tested on WD Elements hard drives. Drives must have the original anti-vibration &nbsp;rubber pads on screwes to fit this housing.</p><p>Updates:&nbsp;</p><p>1/I've fixed the distance beween the center of rubber pads from 75 to 76.6mm, althrough it fitted even with the 75mm size the fit wasn't perfect.</p><p>2/ I've hanged the circular holes in top&amp; bottom to eliptical to save same material. I've also made the top/bottom/sides thinner for additional material savings and to speed up the print.</p><p>3/ The 4 and 8 disks version has been replaced by 5 and 10 version respectively.</p><p>Warnings:</p><p>The vesion for 5&amp;10 drives must be printed with supports.</p><p>Beware the 10 disks version is too tall and exceeds the maximum default print bed height of MK3s by 2mm. I tought my MK3s can handle the print as there is physically few extra mms, but it actually hit the 210mm barrier without finishing the print completely.</p>