2.375/2.5" 15 Degree 3.54/3.75" CLR YX Tube Clamp

cults3d

These are clamps that are used to clamp 15 degree bends to cut and make y and x pipes. There are two clamps included in this kit. One is for 2.5" 15 degree 3.75" CLR tubing and the other is for 2.375" 15 degree 3.54" CLR tubing. The clamp uses four m10 nuts and bolts to hold it together. Don't try using it without the bolts. It's not fun. The material I use with this is bought at ace race parts at https://www.aceraceparts.com/collections/mandrel-bends-stainless-steel/304L-Stainless I also found mandrel bends that are made the same way on stainless bros as well. The only difference is that the legs are 6.5" not 6". https://www.stainlessbros.com/loose-radius-15-mandrel-bend.html I chose to make two clamps for the ability to choose between two products. One you can butt weld while the other is a slip fit. Who knows what is in stock during these times. After the y pipe is made you will need to cut the end off to fit an ovaled 3" pipe. (If you are making an x pipe don't worry about making it close to 3". Just cut both y pipes evenly and mate them) This will require some bending, I used a vise but a BFH could work too. If you have a swage then you're way ahead of me. I then added an ace race v-band clamp to finish it off.