$15.99SCX24 U4 chassis

myminifactory

OFFICIAL SCX24 TUBE CHASSIS OF @LITTLEGUYRACINGSERIES This purchase includes all the files for this kit including the different options for hood and roof as well as body panels and the chassis itself THIS CHASSIS WAS DESIGNED: - To have a 145-155mm wheelbase with custom links using the scx24 rod ends sold on shapeways (printed link kits specifically for this chassis will be available soon but you will still need the rod ends) with the perfect stretch wheel base you can use 6 stock axial links on the car you will just have to make custom rear lowers as pictured - To use a 4 link servo mount and EMAX ES08MD or savox servo - To use scx24 mil-stone wheel wideners or hot racing extended axles. The hood is designed to have (2) 6mm or 1/4" OD X 2mm tall magnets which you will glue two of them to the chassis and two to the hood they are available on amazon. The battery is meant to Velcro in the forward most tray in the chassis with Dimensions: 45mm Length x 25mm Width x 17mm Height. The TATTU 450mah 7.4v lipo with those dimensions fit perfect. Shock mounts are designed for ability of various ride height or various shock packages such as stock, hot racing, cr-24, or cariama shocks will all fit on the chassis side, some will require modifications on your end to adapt parts over but they will physically fit. YOU DO NOT USE THE STOCK FRAME RAILS WITH THIS CHASSIS. You will slide the skid plate directly into the bottom of the chassis without frame rails.Wheel wideners are highly recommended for this chassis to improve handling and avoid tire contact with frame. Holes may need to be chased with a 1.2mm drill bit after printing. BODY PANELS use 1.2mm or 1.4mm X 4mm hardware 050 size motors or "barrage" motors will not fit without slight modification to the firewall section. The chassis is beefy but it is not indestructible.