140mm fan to 100mm air tube with ziplock space
thingiverse
Conversion of a 140mm computer fan to a 100mm air tube with space for securing the tube using a ziplock, designed specifically for extracting ABS gases from my printer case. Built this project using the following parameters: Printer: Anet A8 Prusa i3 Filament: PLA Nozzle diameter: 0.4mm Software used: tinkercad.com and Cura Layer height: 0.2mm Wall thickness: 0.8mm Top/bottom thickness: 0.8mm Infill density: 20% Printing temperature: 210c Plate temperature: 60c Diameter of filament: 1.75mm Flow rate: 100% Retraction enabled Retraction speed: 25mm/s Minimum retraction travel: 0.8mm Print speed: 75mm/s Travel speed: 150mm/s Cooling system enabled No supports used Brim width: 0mm Printer settings: Printer model: Anet A8 Prusa i3 Rafts not required Supports not needed Resolution: 0.4mm Infill level: 20% Notes: Filament type: PLA Nozzle diameter: 0.4mm Software used: tinkercad.com and Cura Layer height: 0.2mm Wall thickness: 0.8mm Top/bottom thickness: 0.8mm Infill density: 20% Printing temperature: 210c Plate temperature: 60c Diameter of filament: 1.75mm Flow rate: 100% Retraction enabled Retraction speed: 25mm/s Minimum retraction travel: 0.8mm Print speed: 75mm/s Travel speed: 150mm/s Cooling system enabled No supports used Brim width: 0mm
With this file you will be able to print 140mm fan to 100mm air tube with ziplock space with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 140mm fan to 100mm air tube with ziplock space.