125mm / 5inch vise soft jaw grip with v-grooves

prusaprinters

<p>As the name implies, another vise soft jaw design, but for 125mm, including v-grooves. There's holes to insert d4x12.5mm supermagnets for easy clamping.</p> <p>The hight of the standard vise jaw of my vise is 20mm, so the softjaw is made to fit around that.</p> <h3>Print instructions</h3><p>Printed on a Prusa mk3 i3s+ with 0,4mm nozzle in PETG, 4 shells, line width of 0,6mm, except for 0,45mm external perimeters,15% rectilinear infill and 0,15mm layer thickness. I had adhesion problems so I used a brim.</p> <p>Print it lying down on the flat side, or if you're a risktaker: on the short end.</p>