120 mm to 80 mm fan mount for Snapmaker enclosure
prusaprinters
<p>A bigger fan with a lower rpm and the same airflow will be much more quite than the standard 80 mm one. </p><p>For a better printability I sliced the model in two pieces. You need to glue the button of the 80 mm part to the top of the 120 mm part. watch out that the sides were the nuts go are facing towards each other. The mounting of the Fan will be with some M4 nuts and screws.</p><p> </p><p><strong>Importent</strong></p><p>I use a ARCTIC P12 which is 2,5 cm in depth. A Fan which has bigger dimensions will collide with the printbed. </p>
With this file you will be able to print 120 mm to 80 mm fan mount for Snapmaker enclosure with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 120 mm to 80 mm fan mount for Snapmaker enclosure.