11th Doctor Sonic Screwdriver Redrawn

thingiverse

This design was created as a reference for another toy crossover, starting with TheNewHobbyist's model but redrawn from scratch using other downloaded images. The handle is divided into different color pieces for show-accuracy without needing paint. Additionally, a tip and core piece were added, the prongs reduced to four, and the telescoping part and opening prongs were fixed to work properly. However, the printed model won't be spring-loaded; it needs manual extension and prong opening. The designer has printed this model and mentioned some tricky overhangs during the printing process. The core and tip should ideally have been translucent green, but translucent blue was used due to unavailability of the former color. A minor change was made to the white_handle to add a hexagonal indentation. The source file has also been uploaded, along with a version of the handle that is connected to the cage using a twist-to-release mechanism for battery replacement. Another version of the black part of the handle is provided, suitable for accommodating an Arduino Pro Mini. It is essential to note that this model is fragile and may require gluing certain parts together, especially the tabs between white and black parts of the handle, and the sliding parts on the cage. If the model will be used frequently as a toy or prop, it's better to glue the movable parts in an open or closed position for stability. Print one copy of each part except four 'silver_prong' pieces. The color of each part is indicated, and the 'connecting_rod' can be any color as it's hidden inside. Some parts like green_tip and silver_cage may require support during printing; alternatively, provided versions with manual supports are available for printing. A hollow version without a connecting rod is also available, fitting together using tabs on the insides of each piece. Assemble the model by inserting the connecting rod into specified parts, pressing gold_cage over green_core, and gluing if necessary. Attach four 10mm long pieces of filament to silver_prong parts and snap them into silver_cage. Place silver_cage over gold_cage, followed by attaching the green tip piece into the center of the silver cage. The green tip should telescope in and out of the green core when the silver cage is moved forward and back. The designer may update plans and instructions after printing this model.