10x20 Cable Chain - X Axis Anycubic I3 Mega

thingiverse

Found easier to print the complete chain in one piece. The chain element is slightly modified compared to the original - I increased clearances between consecutive elements because printed samples had a real tight fit, and I was afraid of putting too much effort into the belt with a completely tight chain. If used for Anycubic, you get four spares. Post-print simply lift both outer flanges on each side for each element, and the chain becomes loose. The V3 model has built-in supports defined between each two elements that need to be pushed out of course. The complete installation for Anycubic I3 Mega: https://www.thingiverse.com/thing:2860786 EDIT 1: Second model (V2s) uploaded with reduced pins, might help to uncouple or couple the chain elements. The single chain element was uploaded too. EDIT 2: Third model (V3) uploaded that has built-in easy removable support structure added and reinforced side walls. A picture with support structure shown yellow is added. One interface bracket is added, which might be useful to test how the AI3M hotend final connector will pass through the chain. It should have a 0.5mm clearance but slicer settings and printing quality might decrease it.