100W LED flashlight 18650

thingiverse

This flashlight utilizes a 100-watt diode cooled with a PC heat sink, specifically designed for the LGA1150 and similar platforms. The power source is comprised of repurposed Sanyo 18650 cells. Power regulation is managed through a potentiometer. In the near future, I will compile a comprehensive list of necessary components and instructions. Printed using an Ender 3 3D printer with a nozzle diameter of 0.8mm and a layer height of 0.32mm. The casing exhibits remarkable hardness and strength, potentially requiring delicate sawing operations to install the multimeter and power switch. The rear flap is secured in place by screws sourced from a PC fan. List of specifically utilized components: https://s.click.aliexpress.com/e/_dZJKbQ4 DC-DC boost converter 250W 10A https://s.click.aliexpress.com/e/_dVHtktA 100W LED https://s.click.aliexpress.com/e/_d8gyW08 DC-DC step down to fan https://s.click.aliexpress.com/e/_d7lOG6Y ON-OFF switch https://s.click.aliexpress.com/e/_dS98xO4 10k potentiometer https://s.click.aliexpress.com/e/_d6KSAAC voltometer 100V 10A https://s.click.aliexpress.com/e/_dUNLuF2 lens, colimator, bracket https://s.click.aliexpress.com/e/_dUTmmWY balancer connector (for correct battery charging) https://s.click.aliexpress.com/e/_dYGbk6g dean connector to battery (you can use xt60 or something else - I use dean) 1150/1151/1155/1156 stock CPU cooler At least 8 high-current 18650 cells (4s2p)