1/8 Toyota 22RE Engine / Air Filter extension
thingiverse
This is an Air Filter for the 22RE Toyota Engine (https://www.thingiverse.com/thing:644933). The air filter was originally designed by FunFly024 at this link https://www.thingiverse.com/thing:3272806, and also by Desertimage at this link https://www.thingiverse.com/thing:3338408. I modified the support for adding screws to enhance functionality. To improve airflow, I added a hose to offset the air filter to the air inlet and included 2 hose clamps. My finished project can be viewed at https://www.thingiverse.com/make:692499. # Print Settings 1 x AirFilterBase : Layer:0.15mm Raft:no Support:no Infill:15% 1 x AirFilterHose : Layer:0.15mm Raft:no Support:no Infill:100% 2 x AirFilterClamp : Layer:0.15mm Raft:no Support:no Infill:100% # Accessories 6 x m2x3mm SHCS 6 x m2 washer 2 x m2x8mm SHCS 2 x m2 jam nut # Mounting Tighten the screws m3x2mm loosely with washers on the base. Install the screw m2x8mm with its nut on the first collar. Then thread the collar onto the base and tighten it gently. Attach the hose to the base by gluing it in place. Install the screw m2x8mm with its nut on the second collar. Then thread the collar onto the hose and tighten it gently. Do not glue the hose to the air inlet.
With this file you will be able to print 1/8 Toyota 22RE Engine / Air Filter extension with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 1/8 Toyota 22RE Engine / Air Filter extension.