1.75mm bowden ziptie with ubis mount
thingiverse
This design is made for use with 2mm internal diameter (ID) and 4mm outer diameter (OD) tubing. It requires zip ties to secure the tube ends, which are held in place using 4mm screws. The hot end is also fastened with these screws. To enhance performance, it is recommended to pair this part with a filament guide for both the Bowden tube and extruder end. A good choice for the latter would be the Alex extruder due to its heavy guidance. Although untested, Flex PLA 1.75mm may work well too. The original design can be found at http://www.thingiverse.com/thing:28400 and was customized using the Customizer tool available at http://www.thingiverse.com/apps/customizer/run?thing_id=28400. The specifications for this version include a body height of 16mm, bowden tube diameter of 4.4mm, hot end screw diameter of 4.1mm, zip tie width of 3mm, Bowden jaw top at 12mm, jaw height of 42mm, hot end holder width of 23mm, hot end diameter of 17mm, Bowden jaw bottom at 15mm, and hot end height of 12mm.
With this file you will be able to print 1.75mm bowden ziptie with ubis mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 1.75mm bowden ziptie with ubis mount.