1/4" Pegboard GPU Display Mount

1/4" Pegboard GPU Display Mount

thingiverse

I had printed a GPU display stand but realized I have no shelf space. So I decided to heavily modify the stand design I printed to work on a Wallcontrol metal magnetic pegboard, which uses ¼" peg holes. The ¼" peg holes should also be the same as standard pegboards from hardware stores and ikea. To help you identify if you can use this on your own pegboard,The spacing between the hooks is:4 inches between the far ones2 inches between close onesA hair over 6 inches from the hooks on the two endsI printed it in PLA+ with 15% infill (grid). If you are wanting to mount a bigger heavier graphics card, I would advise a stronger infill percent and pattern. It seems to hold this Nvidia RTX 2060 FE just fine though. I did enable tree supports as well.

Download Model from thingiverse

With this file you will be able to print 1/4" Pegboard GPU Display Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 1/4" Pegboard GPU Display Mount.