1/4" Dowel jig
thingiverse
This is set of jigs for drilling holes for 1/4" dowels. It includes files for two widths: one for 3/4" stock and one for 1.5" stock.The jig has an inset suitable for a Kreg 2" Classic Face Clamp, which is useful when drilling into thin stock, or it may be placed in a vise or held firmly in place.The jig also includes alignment lines for each hole. The edges of the jig are flat and may be used to register alignment against a flat surface.Consider using a piece of tape or a collar to mark the drilling depth needed for your dowel.You will need the following materials:2x 1" lengths of 1/4" ID stainless steel tubing (make sure your drill bit fits in the tube)Epoxy or cyanoacrylate glue, depending on how snugly the tubing fitsInsert the steel tubing into the jig and glue into place.
With this file you will be able to print 1/4" Dowel jig with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 1/4" Dowel jig.