1/4-20 Mount for Monster M4SK Case

thingiverse

Mounting the Monster M4SK case to a tripod or pan/tilt base requires a few simple steps. To secure it in place, you'll need a zip tie and a 1/4-20 nut. Version 1: First, thread the 1/4-20 bolt through the case's mounting hole. Next, attach the zip tie to the bolt, leaving enough slack for the nut. Place the nut on top of the zip tie and screw it onto the bolt until snug. Finally, secure the zip tie in place by tightening it around the nut. Version 2: This version positions the nut on the underside of the case. Begin by threading the 1/4-20 bolt through the case's mounting hole from the bottom up. Attach the zip tie to the bolt, leaving enough slack for the nut. Place the nut underneath the case and screw it onto the bolt until snug. Finish by securing the zip tie in place around the nut. The key is to keep everything snug and secure to prevent any movement during use. With these steps, you'll be able to mount your Monster M4SK case with ease.