1:200 Mikoyan-Gurevich MiG-15 Fagot

cults3d

1:200 Mikoyan-Gurevich MiG-15 Fagot This plane surprised western nations when in the 1950s it proved to be largely superior to almost all fighters of that time; only the F-86 Sabre and a high-level training were able to recover the advantage during the Korean conflict. The two-seat variant of the MiG-15 served as a transition aircraft for pilots destined for the MiG-15 but also the MiG-17. The MiG-15 UTI practically always did mount the external wing tanks because the fuel tanks in the fuselage had been reduced to make room for second seat. Variants: MiG-15 bis clean MiG-15 bis with fuel tanks MiG-15 UTI with fuel tanks New models Optimized for 0.2mm extruders with better resolution and details; old models at lower resolution can be found in the old.zip file. Models scale 1:200 made to be printed with a FDM with 0.2 nozzle at this scale. For other scales use the following values into your slicer: for 1:100 use 200% for 1:144 use 139% for 1:200 leave 100% for 1:285 use 70% for 1:300 use 66% At 1:100 it can be used a FDM printer with a 0.4mm nozzle. Under 1:200 is almost mandatory a resin printer. Print test 1:200 mades as shown in the image from Cura with a FDM with 0.2mm nozzle and 0.12 mm layers. This creation is reserved exclusively for private and personal use; redistribution of these files, as they are or modified, is not permitted. For further details read the "Copyright" section in the FAQ section of Cults site by clicking on the (C) symbol below. ciao