009 Ffestiniog Railway gunpowder van

thingiverse

Ideally for resin printers. Best printed at 0.02mm layer height. The only thing you will need to make is the brake assembly. I made them from paperclips, but any thin metal strips bent to shape should work. There is a locating hole underneath the chassis for the lever. Any axles should work, but I used Kato 11-606. I would recommend adding a little bit weight inside the body. I used a 5g wheel balancing weight as this sat perfectly on top of the chassis. You can file down the NEM pockets if you want the vans to sit closer together, but be sure not go too far or they may interfere with the axles.