0.75 inch (19mm) Dowel Bracket For Dry Box

prusaprinters

<p>I needed a mounting bracket for a dry box I was making. I wanted to reuse a 3/4" dowel I already had lying about but I couldn't find a bracket that was quite what I needed.</p> <p>The outside piece helps re-enforce, provide air blocking, and to provide shallow recess for the nuts to stop them turning during tightening.</p> <h3>Print instructions</h3><ul> <li>0.2mm layers</li> <li>3 perimeters</li> <li>10% infill</li> </ul> <p>Assembly:</p> <ul> <li><p>Hardware:</p> <ul> <li>8x M3 x 8 screws (4 per side)<ul> <li>8x M3 hexagonal nuts</li> </ul> </li> </ul> </li> <li><p>I used a ruler to try to find the center of each side (you can see my sharpie mark). Then used the back pieces as a template to mark the holes I needed to drill through the storage box I was attaching them to.</p> </li> </ul>