stealthburner 3d models

This cable cover has the necessary clearance to provide room for connectors and cables without interfering with the fan. ...Installed on a Stealthburner toolhead with the BTT SB2240 CANBus PCB.

Remixed from https://www.thingiverse.com/thing:5253369 fit the Voron Stealthburner.Two part design with 2 bolts and nuts to connect the carriage and the same heat inserts as in the stealthburner assembly for mounting the hotend.In difference to voron...

Removed the stock extruder setup on the Mini Stealthburner to add an orbiter with fil sensor, uses the same hotend mounts and X carriage. ...Needs 3 heatsets for the extruder and  to mount it to the stock X carriage

 It's simply a means to adapt the current MGN12 mounted version of the Stealthburner to the CR-10 or equivalent printer.Parts Needed:MGN12 Linear Rail of suitable lengthReplacement 2GT X-Axis Belt (2mm pitch, 6mm width)3D Printed Stealthburner Parts...

Phaetus Dragon Hotend UHF StealthBurner mount. I needed a mount so I designed this. ... This was one of my first TinkerCad projects so its not the best but it works well for me.

This is a Stealthburner adapter for the original Dayu CoreXY V1.53 (200x300 bed) printer.4 heat inserts are required for the mounting holes for Stealthburner, like the original carriage for Voron printers.An optional BLTouch (or clone) mount is added...

This is a remix ofhttps://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversionwhich is a mounting plate for an Ender3V2.I have moved the mounting holes on the plate to fit an Ender3 (maybe pro too). ...Everything else is from the...

This is a remix of https://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversion which is a mounting plate for an Ender3V2. I have moved the mounting holes on the plate to fit an Ender3 (maybe pro too). Everything else is from...

Wanna build your own version of a voron switchwire but already have cable chains and don't want to print new ones than just print this piece and put the one heat set insert into it. It allows the use of standard ender 3 style cable chains to mount...

I wanted to retain as much Stealthburner functionality as possible (2-part PCB & Tap), while also enabling remote part cooling. ...All of the other attempts to solve for this did not have enough clearance between the duct and the PCB, so this...

--------------------------------------------------------------------------------------------- Adaptador de montaje para un cabezal de impresión Stealthburner (https://github.com/VoronDesign/Voron-Stealthburner) en una impresora BQ Hephestos 2. No...

... any suitable one. ...pinda sensor is attached on the right side so that the left adxl remains free. The mount is for the stealthburner printhead version revo-V6 part. ...Insert the threaded insert into the hole, it should go through the first hole.

Credit to the hardworking guys in the Voron Community for the Stealthburner https://github.com/VoronDesign/Voron-Afterburner/releases/tag/sb-beta0 Design is license under GPLv3 as per Voron license...

I made this as I wanted the 5015 blower on the stealthburner but have no real interest in upgrading hotends or going direct drive, I also didn't like where they mount the probe as you essentially lose 20mm of your print area. You will have to...

I wrote down an intruction sheet on the hardware to use and on how to assemble it: https://github.com/icecold9300/CR6-Stealthburner-mod My prototype is printed in PLA+ but I'll reprint all (exept for the fan cover) parts with a better heat-resistant...

Modified to fit the stock Clockwork 2 files, spaced out to fit the HartK Stealthburner toolhead board, BL-Touch mount has been removed, and a groove has been added to the rear for the https://github.com/kevinakasam/KlackEnder-Probe Note,...

It is compatible with the new [Voron Stealthburner](https://vorondesign.com/voron_stealthburner) printheads and extruders. ...It also includes an integrated BL-Touch mount Important, the carriage is compatible with the new CW2 style extruders only...

I made this as I wanted the 5015 blower on the stealthburner but have no real interest in upgrading hotends or going direct drive, I also didn't like where they mount the probe as you essentially lose 20mm of your print area. You will have to...

You need the following screws: 2x Cylinder head screws M3x30mm 2x Cylinder head screws M3x14mm 4x Cylinder head screws M3x20mm 4x Countersunk screws M3x6mm You need the following inserts: 4x Thread insert M3 x 4mm (L) x 4mm (OD) 4x Thread insert...

Credit to the hardworking guys in the Voron Community for the Stealthburner https://github.com/VoronDesign/Voron-Afterburner/releases/tag/sb-beta0 Design is license under GPLv3 as per Voron license...

This model adapts the metal carriage of the original Kobra to be able to mount the Voron Stealthburner toolhead. ASA is the recommended material for printing this. 4 walls, 4 tops and bottoms, 25-40% infill. ...You will need four heat set inserts and...

IT's for use with the Voron Stealthburner toolhead on a CR-10 with a MGN-12 linear rail X-Axis. Mount the limit switch inside the housing before you install the housing onto the printer. You'll need screws that are 5mm longer than the...

Remixed Adapterplate to use Voron Stealthburner and direct drive Clockwork2 on Anycubic Viper.&nbsp;I made some small changes to fit the clockwork 2 on the adapter plate by fragmon. Just normally print it and it should fit perfectly.</p><p>I had to...

This is a remix of Roma Aquatic's Stealthburner cooling duct for the Microswiss Direct Drive (https://www.thingiverse.com/thing:5178108); I just changed the location of the mounting holes to make it suitable for the regular Ender 3 X carriage. ...I...

This design is inspired by the Voron stealthburner with a touch of my style.This work is sponsored by PCBway.com, which we know that they not only provide PCB printing services but they also provide prototyping 3d printing services such as SLS, SLA,...

This is a cable gland mount that replaces the Stealthburner chain mount with a facility to attach an M16 or optional M12 cable gland. ...I've been using this on my Voron Trident with a Huvud CAN BUS setup and has worked really well.You can find the...

... &nbsp; Your choice, really. ...&nbsp; Mine are ABS or ASANotes:The multi-color print in the photo is using 4 layers of Color 1 before switching&nbsp;Shoutout to the Voron team for the awesome StealthBurner design! ...&nbsp;Great inspiration.</p>

With that said I am uploading some files I made to mount a Stealthburner on a 3dfused x carriage for the ender 3 v2 After printing all 3 files you will still need to cut out a small slot where the belts rub against the back of the wire door. ...

This is version of printhead mounting adapter for Anycubic Vyper and Clockwork2 extruder for original backplate.The adapter allows to mount latest version of Stealthburner printhead with Direct Drive extruder Clockwork 2 on original metal backplate...

You will need : 4 x M3 Threaded Insert 1 x M3x30 SHCS or BHCS 1 x M3 Nut 2 x M3x16 SHCS or BHCS 2 x M3x10 or 12, SHCS or BHCS 1 x M3x20 FHCS (optionnal, only for the Ender 3 Pro) I will use it for the Stealthburner but it fits for the Afterburner...