snapmaker a350 enclosure 3d models

Snapmaker 2.0 A350 Laser Plate holder attachment. Keep the plates securely stored and not get scratched with this 3D print. Designed to be attached to an enclosure using 3mm diameter screws / bolts with less than 5mm head. Will work at the...

A remix of the Snapmaker A350 Creality Glass Holding Brackets by rvanemon but for 310x320 mm sized glass. ... These Brackets secure the CREALITY 310mm x 320mm x 4mm Glass to the Snapmaker 2.0 A350 bed.

Laser Bed Holder for the Snapmaker 2.0 A350 just a way to keep it out of the way

Square for positioning plate on Snapmaker A350. ...I made this model to easily get consistent quality when engraving a alluminium plate.

Snapmaker A350 mount for the Sharpie holder created by Devin Montes that can be found at https://www.myminifactory.com/users/MakeAnything.

A filament guide for a Snapmaker 2.0 A350. ...It can screw on to the near Z-axis linear system with the excess M4x8screws.

--------------------------------------------------------------------------------------------------------------------------------------------------------------- Snapmaker2.0 Touch Panel Controller Holder Compatible model: Snapmaker2.0 A250/A350...

Universal Filament Spool-Holder - Designed for Snapmaker A350. - Suitable for all filament-spools with inner diameter from 45mm up to 85mm. ... - Diameter above 85mm are possible but not tested.

--------------------------------------------------------------------------------------------------------------------------------------------------------------- Snapmaker2.0 Touch Panel Controller Holder Compatible model: Snapmaker2.0 A250/A350...

This is a dust fence for the Snapmaker 2.0 A350's CNC function. Even though I do have the stock enclosure, I still don't feel like having dust flying everywhere in it. And the vacuum does not catch 100% of the dust, so I decided to create this...

I just bought a SnapMaker A350 and wanted to use my Mosaic Palette 2 Pro. Didn't find my clip that came with my Palette. So I decide to create one. It fit perfectly the A350 with the PTFE tube that came with Palette 2Pro. Can be use with or...

The air duct attaches to the laser bed of the Snapmaker A350 to provide air assist and smoke extraction. The duct is designed to fit a 100mm flexible air duct that can be connected to an extraction fan. ... The has slots and holes on the sides to fit...

A simple shroud to cover the Y connectors on the base of the Snapmaker A350. Hides wires, protects from dust, and has a sloped front edge to keep the heated bed cable from getting in a bind. ...Recommended print orientation is with open side facing up ...

... on things I added a CABLE CHAIN. ... I used (18) of the CABLE SEGMENT and CABLE LID and then printed special ends and mounting to connect with them. The SHIM and CLAMP are used to connect to the sand cast base plate of the Snapmaker 2.0 A350 printer.

I had to find a system to fit the aeration hose of the SNAPMAKER 2.0 A350 has a ventilation that I had on the ceiling in my basement. ...Maybe some pieces can be used by others or give them ideas.</p>

<p>This is a remix. ...Webcam mount for the A350. Mounts on the side. Print Settings Printer: Snapmaker 2,0 A350 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: Eryone PLA + PLA + White Category: 3D Printer Accessories

Yi home camera mount for A350

Wasteboard from 18mm MDF customised for Snapmaker 2.0 A350. But rather than using Screw-In nuts for workpiece fixing, I used pronged T-Nuts, which will not get loose from the wasteboard. (In my case, Snapmaker screw-In nuts got loose after some time,...

These Brackets secure the CREALITY 310mm x 310mm x 4mm Glass to the Snapmaker 2.0 A350 bed. As we all know the A350 bed is very bad for flatness, mostly around the outer 50-75mm. This helps, but my end goal is to shim the heat plate to flat and...

Screen stand for Snapmaker 2.0 A350, maybe also for other models. The stand is printed as two separate prints and then glued together. 0.2 mm print quality, I chose the fast one, it took about 5 hours to print on a prusa i3 mk3. The spacing of...

YOU ARE RESPONSIBLE FOR ANY DAMAGE THAT YOU CAUSE TO YOUR PRINTER - This is the profile that I use everyday for the Snapmaker 2.0 A350 with excellent results and zero issues. I may update if I implement any improvements. Any and all suggestions are...

# RASPBERRY PI SHIELD FOR SNAPMAKER 2.0 A350 This model allows you to position a Raspberry Pi in the front of your Snapmaker 2.0 A350. The shield slides between the two linear motion rails that move the printbed, and is kept attached to them via 4...

Used with an A350, it will likely work with smaller versions of the SnapMaker 2 as well. This modification solves the issue of filament coming off the reel when the machine moves to home position. Default setup is for a small spool with a 32mm...

The purpose of this manual is to solve the following problems of the Snapmaker A350: a) Uneven printing surface b) Fluttering of the printing surface when changing the direction of the Y-axis c) hooking of the sensor and shifting of the printing...

The purpose of this manual is to solve the following problems of the Snapmaker A350: a) Uneven printing surface b) Fluttering of the printing surface when changing the direction of the Y-axis c) hooking of the sensor and shifting of the printing...

I suggest using careful placement of hot glue to help hold the LED strip in place more effectively. Links of interest: Snapmaker 2.0 A350: https://snapmaker.com/product/snapmaker-2 Snapmaker's official video on how to use CNC mode: SIBE-R Plastic...

Links of interest: Snapmaker 2.0 A350: https://snapmaker.com/product/snapmaker-2 Snapmaker's official video on how to use CNC mode: https://www.youtube.com/watch?v=OgUdDoCx5iw SIBE-R Plastic Supply 12" x 12" x 0.25 " black extruded acrylic:...

This is for a 3.8mm high bed that is just slightly (0.5mm) larger than the Snapmaker bed in all dimensions. Make sure to only adjust inner walls and not outer walls, as adjusting outer walls may cause them to run in to the Z axis rails. ... One...

Snapmaker 2.0 A350 CNC Clamps • Designed originally in Fusion360 (attached) • .jsons for print & filament settings (attached) • Contains three (3) styles of clamp 1) 4-Screw straight 2) 6-Screw 90 Degree elbow 3) 8-Screw T Built with a 0.3mm offset.

This is a remix. ...Webcam mount for the A350. ...Mounts on the side.