robo 3d

This filament spool holder is designed for Robo 3D Printer Filament used on the FlashForge Creator Pro. Although the entire design was thoroughly re-created, its foundation remains rooted in http://www.thingiverse.com/thing:930910. We're including...

The Robo 3D Printer's spool holder features an adjustable "Left" arm, though some users suggest it could benefit from a thicker rod. Nonetheless, this accessory has been receiving positive feedback and is a must-have for seamless printing. ...Happy...

I discovered that the X-axis belt on my Robo 3D R1 was slipping off the 8mm bearing and scraping against the large washers, causing increased friction during X-axis movements. ...To resolve this issue, I created a custom press-fit guide for the bearing...

... in the process. Printer Settings: - Printer Brand: Robo 3D - Printer Model: R1 PLA - Rafts: None - Supports: None - Resolution: 0.2mm - Infill: 15% honeycomb Notes: I use slic3r to slice my prints, with auto-width and a print height set to 0.2mm.

Replacement X-Carriage for Robo 3D that supports EZStruder and E3D hot end. ... Update: Fixed files to use the zip tie mounting method that doesn't require disassembling the entire printer and also increased the strength of the belt housing because...

Print Settings Printer Brand: Robo 3D Printer Model: R1 ABS + PLA Model Rafts: Yes, You May or May Not Need Them - in My Experience with the Robo, I Always Have Supports: Yes Resolution: 0.2 Infill: 20% + Notes: Printers Can Vary, So Be Prepared to...

Just sealed off the LED openings RoBo 3D Hexagon Hot End with 40mm Fan and LED - version 2.2 is this revised model ( http://www.thingiverse.com/thing:593544) which does not function as intended it conflicts with the housing on the RoBo 3D if its...

Print Settings: Printer Brand: Robo 3D Printer: R1 PLA Model Rafts: No Supports: No Resolution: 200 Infill: .10 Notes: Extruder 195, Bed 35, 3M painter's tape, Extruder Speed set to 95%. ...I used Cura for the stand and Slic3r for the holder because it...

... ...To complete the project, you will need a DC jack and an ethernet jack. Print Settings: Printer Brand: Robo 3D Printer Model: R1 ABS + PLA Rafts: No rafts were used Supports: No supports were added Notes: This model was printed in white Inland PETG.

I mounted this device to get perfectly stable time lapses on my Robo 3d R1 using https://www.youtube.com/watch?v=CgCxuVYhO1Q for guidance, check it out if you're interested in seeing how I did it. Mount the glass plate up on your printer and attach...

The ROBO 3D X carriage fitted with an e3d v.6 hot end is specifically matched by this fan mount, sized at 30mm to fit perfectly into place on either side of the extruder. It locks firmly onto both sides, securing its position for balanced operation.

To print this item, use a Robo 3D printer with the R1 ABS + PLA Model. Print settings should be as follows: rafts are not needed; supports are also not required; resolution is set at low; and infill is twenty-five percent. ...This model was printed in...

Adjustable Z-axis supports for left and right rods ensure a perfect fit on your Robo 3D printer. The brackets attach securely to the case using 1" double-sided foam or mounting tape, with pencil markings indicating precise placement. Ensure the tab...

Print Settings: Printer Brand: Robo 3D Printer Model: R1 ABS + PLA Model Rafts: No Supports: No Resolution: .1mm Infill: 15% Notes: I used a shell thickness of .8 for both horizontal and fill, with a .1mm layer height. ...The print speed was set at...

Print Settings: * Printer: Robo 3D * Printer Model: R1 ABS + PLA Model * Rafts: No * Supports: No * Resolution: .1mm * Infill: 15% * Notes: I used a shell thickness of .8 for both the horizontal and fill layers. ...I also printed at .1mm layer height,...

Resolution: n/a Infill: 100% Notes: Fits a 25x25x10 mm fan unit with the original RoBo 3D R1 heatsink, and I printed it with 3mm ABS filament on a Lulzbot Taz 5. ... Hotend Temperature: ~246 degrees Fahrenheit Bed...

... the Job. Print Settings: Printer Brand: Robo 3D Printer Model: R1 ABS + PLA Rafts: Not Necessary Supports: No Need for Them Resolution: 2.00 Layers Infill Percentage: 60% How I Came Up with This Design: I Used Autocad Inventor to Bring It to Life

This ROBO 3D R1Sony Action Camera Mount accommodates any Sony Action Camera, such as the SONY HDR-AS30 (https://www.sony.co.uk/support/en/product/HDR-AS30). The model was designed using Autodesk Inventor Pro 2017, and you can edit it by downloading...

X-axis belt tensioner setup for Robo 3D uses a 608 bearing. The tensioner bolts to the side washer of the x-axis idler pulley, utilizing the existing bolt and featuring a keyed slot for the bolt head. This design enables you to tighten the lock nut...

This was designed primarily due to clearance issues with the Robo 3D R1+ whose stock fan mount doesn't allow for other hotends that all use clip-on fans to be mounted, which forces one to remove the stock fan mount to use other hotends, a tedious...

... ... Check out the Toolless Bolt for SainSmart LCD Smart Controller 12864 on Robo 3D R1+ (M6x25) for a similar bolt for a SainSmart LCD Smart Controller 12864. Custom version of http://www.thingiverse.com/thing:193647 Created with Customizer!

Printer Settings: Printer Brand: Robo 3D Printer Model: R1 ABS + PLA Model Rafts: No Supports: No Resolution: .3mm Infill: 20% Use standard 1/4-20 nuts and hex bolts. M6 may also work well. Position the GoPro frame in the yoke, then push a short hex...

Print Settings: Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: .3 Infill: 20% Notes: Use standard 1/4-20 nuts and hex bolts. M6 may also work. Position the GoPro frame in the yoke, push through a short hex bolt...

A foot strap secures down with a standard 1" nylon strap and optionally supports a handle for on-the-go convenience when using Robo 3D. The handle is made of 1" schedule 40 PVC pipe, attached to the system via 1/4-20 bolts. The bed bumper is printed...

... parts, forgetting it's there... Haven't done the back yet but believe it to be a mirror image of the front... Printer Settings Printer Brand: ROBO 3D Printer Model: R1 ABS + PLA Rafts: None Supports: None Resolution: 200 dpi Infill Percentage: 10%

The Robo/E3D logo was added as well, along with a ziplock mount designed to hold the wiring harness securely in place.\nPrint Settings\nPrinter Brand: Robo 3D\nPrinter Model: R1 ABS + PLA Combination\nRafts: None Used\nSupports: Yes, for added...

It seems to work significantly better.\nI became frustrated with the stock cable management on my Robo 3d R1 and set out to create a better solution. After switching to the E3D Titan extruder, I took the opportunity to install a cable chain, which...

The X-Carriage for Robo 3D printer supports both EZStruder and E3D hot ends, with updated files using a zip tie mounting method to avoid disassembling the entire printer. It also features an increased strength belt housing due to a previous issue.

I created a design that will hold the bearings in place much better and gives a tighter fit and has eliminated the wobble that I was getting. You'll need to print a total of 4 of these. Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA...

I designed a Hatchbox Spool holder mount for my Robo 3d R1+, which attaches to the top slot of the printer, allowing for overhead filament feed. Please use this project at your own risk, as I offer no guarantee that it won't cause damage to your...