qidi x plus 3d models

About This is a support bracket for the Qidi X-Plus and X-Max ribbon cable, it attaches to the top extruder cover. Without support, the cable dips down when it gets extended, causing unnecessary stress on the cable as well as it getting greasy from...

About This is a filament cleaner and backspin preventer for the QIDI X-Plus and X-Max. It was originally designed for one of my other designs but I never included it there. To use, print the two parts. Cut a piece of sponge and place it inside the...

I just recently converted my Qidi X-Plus over to a Lerdge K setup like my X-Pro. I wanted to keep the FFC ribbon cable setup but add the auto leveling functionality now available to me. I tinkered with several addon mounts but none of them seemed...

Modified Part Cooling plate for Qidi X-Plus and X-Max BMG V6-Extruder Mod by Chad Wills. Make sure to print with a nozzle not bigger than 0,4mm due to thin wall sections. Do not use 100% fan speed for bridging sectionswhen using this cooling plate...

Version history3.0:Bracket angled towards extruder cover to keep the cable from dipping down.You may have experienced that over time the cable will dip down using the V1 and V2 brackets, this angled design will prevent that.2.0:Improved version that...

The external coil holder of the Qidi X-Plus is not exactly an outstanding example of engineering. At least the usual reels do not fall off during operation and to that extent the wobbly part serves its purpose. Unfortunately, only 200mm diameter...

When changing the high temperature hotend of my Qidi X-Plus to all metal I found a very small cooling fan (30x30mm) and decided to use a bigger on just to ensure maximum cooling for the cold end of the hotend. I had in mind that all metal hotends...

AboutThis is a filament cleaner and backspin preventer for the QIDI X-Plus and X-Max. It was originally designed for one of my other designs but I never included it there. It should fit all printers using a 6 mm bowden tube as well.</p><p>To use,...

Here's a video link showing it in operation: https://youtu.be/FNEvUUR3P8s This is a simple pi-cam mount for the Qidi X-Plus printer for use with Octoprint. I wanted something that would let me see the nozzle and bed while printing remotely to check...

The files added are: external-rod-holder-left-tall-1.0.stl external-rod-holder-right-tall-1.0.stl About The Adjustable Spool Holder for QIDI X-Plus and X-Max works with most filament spools up to 1 Kg. It uses common 608 roller bearings (search for...

About This is an advanced Extruder Cover for the QIDI X-Plus and X-Max. The original cover didn't have much space for a larger fan (although a 40 mm fan just about fits) and was lacking a few other features. The cover has the following features:...

This is a hood cover for the qidi-X-Plus with closeable 50mm hose connector and screw mounting.&nbsp;For mounting it is necessary to melt 3 threaded inserts M3x5,7 (number A and B). The two inserts under number A will still protrude approx. 2mm after...

To upgrade, you only have to reprint this part, the other parts are unchanged: qidi-xplus-xmax-extruder-fan-duct-404020-part-2-ribbon-cable-holder-1.1.stl About This is an alternative to my QIDI X-Plus X-Max Advanced Extruder Cover:...

I originally printed prototypes using my Qidi X-Plus, which produced useable parts, but with all the support issues and material limitations (shrinkage, deformation temperatures when hot end is mounted), I found resin was best. The resin I used was...

Filament guide to use with the spool mod found here: https://www.thingiverse.com/thing:4040807 I used the rollers provided here: https://www.thingiverse.com/thing:3854517 Printed in PLA with support, but used support blockers EVERYWHERE...

I designed this remix to feature an adjustable spool guide system. To achieve this, I separated the ball bearing axles into distinct parts because the original pivots were excessively fragile. The new pivots can be printed with a 100% infill for...

Qidi tech X Plus - top cover closing plate - with thermometer hole, with filament hole or just blank. ... As thermometer used Afriso 63826K - 0-60 grad

Designed to help assist with bed leveling for Qidi Tech. ...X-Plus. Squares are large format 50x50mm and printable area is 250x180 mm. ... Designed to be printed on a single layer with a .04mm nozzle at .02mm layer height.

Designed to help test bed level settings on Qidi Tech X-Plus. 3 rows of 50x50 mm squares to show where adjustments are required. Designed to be printed with a .04mm nozzle at .02mm layer height. ... Printable area is set to 250 x 180 mm

I designed this spool roller to clip onto my QIDI X-PLUS printer, where it replaces a built-in holder that I found created too much friction, especially when printing with TPU material, which caused frustrating voids. To solve this issue, I opted for...

About Gripen is a high flow fan duct for the QIDI Tech X-Max and X-Plus. In order for you to use it, you need the new extruder carriage. I have attached a picture so you can tell if you have the new carriage or not. If you don't have it installed in...

About Draken is a high flow dual channel fan duct for the QIDI Tech X-Max and X-Plus. In order for you to use it, you need the new extruder carriage. I have attached a picture so you can tell if you have the new carriage or not. If you don't have it...

This is a recessed cover designed to close the large opening in the Qidi X-Max & X-Plus printer top covers, allowing for filament spools to be accommodated without excessive pressure. Additionally, I created a 30mm to 50mm spool insert that helps...

I broke my spool holder so made another and it fits the Qidi perfectlyAlso fits all standard rolls of filament. I used Tree Supports and printed in PLA

Step file is available if you want to make any changes.Be sure level the bed afterwards.Print SettingsPrinter:QIDI Tech X-MaxRafts:&nbsp;NoSupports:NoResolution:&nbsp;0.15 mmInfill:30 %Filament: Prusament PC Blend Orange&nbsp;&nbsp;Notes:&nbsp;I...

Made this spool holder extension to be able to mount large spools on the stock spool holder of my X-Plus (i think this should also work with the X-Max). Insert the extensions on top of the fully extended spool holder rods and then place the spool...

3:1 BMG Extruder) // New PID values // tested code in Octoprint M303 E0 S220 C10; // returned: bias:105 d:105 Ku: 37.659279 Tu:21.200001 // returned: Kp: 22.595568 Ki:2.131657 Kd:59.878258 // Send updated PID M301 P22.595568 I2.131657 D59.878258; //...

I bought mine here: https://www.amazon.com/gp/product/B07JG7DS7V/ If they are out of stock the specs are: Inner thread size M3 x 0.5 Outer thread size M5 x 0.5 Length 6mm This is primarily for people who would want to print these parts out in resin...

（If pop out”the same firmware would not update”, please continue to print the rest 2 files） 2.print the "【起迪-Max】双Z单头-UI" file 3.print the " PLUS X-plus参数10毫米.gcode" file After you print all the 3 files,the updating will be done. ... Im include also...

If the black cable clamp on the base of the X-PLUS is flipped around, the cable can then flex to the left, rather than flexing backwards and hitting the frame. The heated bed cable is then zip tied to the stay at the back. (can use whatever size,...