prusa mk3s octoprint 3d models

This is a highly adjustable camera mount designed for use with any camera featuring a standard 1/4"-20 tripod mount screw and compatible with Prusa i3 MK3, MK3S or any other printer using 3030 extrusions. To assemble this mount, you'll need the...

Designed for Prusa MK3S+. I didn't made tests on other printers !!! ENGLISH (French below)After breaking 2 hotend heater when changing the nozzle of my printer, I designed this tool to hold my hotend while I loosen it. Thanks to it, I'm not breaking...

The newer MK3S seems to be coming with a slightly more narrow lcd, and therefore the hole for viewing the lcd in the stock holder is also smaller. This remix is simply an slightly narrower variant that fits this newer version. ... I included the...

This is a small tool holder that uses Jakob170201's design to slot onto the MK3S It holds the full set of hex allen keys as well as some pliers and tweezers, without increasing the width of the printer. Easy to print, I printed it without supports.

... ...The absorber under the Z Axis can be made more resistant by adding perimeter layers. I printed all the models with perimeter of 2 and Z axis with 3.For the MK3S, you don't need to print the Z-Axis absorber. I used FORMFUTURA Python Flex filament.

I couldn't find a fitting holder for my 8mm diameter endoscoop camera that fits on my mk3S+.Found this model on thingyverse: https://www.thingiverse.com/thing:4055057/filesn and modifited it to fit an 8mm endoscope camera.

I made this because I did not have enough rods to build a new MK3s from scratch, so I designed it with MGN9 instead since I had that. I converted the BMG extruder a bit more and is using this printer on a daily bases. ...I hope someone else would enjoy...

White fan duct was printed with the original cooling duct that is standard on the Mk3S+. Orange fan duct was printed with the New fan duct which provides much better part cooling without causing the Hotend temperature to drop. This is a direct...

This is a swift fusion of the MK3 45-degree fan duct and the mounting points for the MK3S' novel extruder body.\r\n\r\nFor those who prefer the classic look of the older MK3/25 duct with its side vents, but now have the new extruder, this mashup is...

Tool holder to hang on the MK3S frame over the PSU. It has compartments for pliers, glue, lubricant and big one for general purpose. ...At the back of the holder there are 6 holes for Allen keys and small tray for nozzles.</p> <h3>Print...

Just a quickie print to add a friction fit filament guide to my MK3S. It helps keep unruly filament on the roll. I used PETG but any non-flex should work just fine. ...I used a .2 layer height and 15% infill.

Since i moved my MK3s into the Platsa enclosure, the LCD did not fit anymore. After a while of using the screen beside the printer, i just decided to adjust the original mounts. ... Now the screen fits perfectly also attached to the printer again!

## Problems with display rattle on your i3 MK3S? Try this, the thingies will sit snug and apply just enough force to the display cover to prevent most of the rattling. [update] Added slightly larger variant in case the small one sits too loose....

I made this because I did not have enough rods to build a new MK3s from scratch, so I designed it with MGN9 instead since I had that. I converted the BMG extruder a bit more and is using this printer on a daily bases. ...I hope someone else would enjoy...

This is a small tool holder that uses Jakob170201's design to slot onto the MK3S It holds the full set of hex allen keys as well as some pliers and tweezers, without increasing the width of the printer. Easy to print, I printed it without...

I'm adding a quick print feature to my MK3S that keeps unruly filament in check by incorporating a friction fit filament guide. This handy accessory works perfectly with PETG, but any non-flexible material will do the trick just fine. ...I printed it at...

Mount Brackets to screw i3 MK3S+ Power Supply (Black One, 240W) to a wooden board. When building an IKEA Lack enclosure, this can be used to attach the power supply outside the enclosure. ... The example picture shows a first prototype version and...

Based on comments, it may not work for mk3s+. [In Japanese]エクストルーダケーブル用のクリップです。i3 mk3s...

In these images, you'll notice well-defined footprints of a medium-sized footwear. ...They are designed to fit seamlessly onto the original Prusa foot components.

Attaches to the left z-axis motor on your Prusa, requires the bottom posable clip of the webcam to be removed.

Based on comments, it may not work for mk3s+.&nbsp;[In Japanese]エクストルーダケーブル用のクリップです。i3 mk3s...

prusa i3 mk3s TPU insulator for Prusa i3 MK3s Dampener v2 by Domidod1d - Thingiverse https://www.thingiverse.com/thing:3684175

These parts are designed to add a timing belt tensioner to the X axis of the MK3S. The U-shaped piece is intended for installing the pulley with bearing inside it, and then a 3mm dowel pin - like a shortened bolt made by cutting one with a Dremel -...

Connecting Logitech C270 to its original axis involves using the MK3-MK3s_Extended_Strengthened_v4_fixed. The lower mount allows for a clear view of the hotend from below, while the leveled mount provides an unobstructed horizontal view of both the...

Reverse Bowden IR Sensor Cover for the MK3s I've included three versions, one designed specifically for the PC4-M10 pass-through connector and another tailored for the PC4-M6 connector. A new version has also been added for the PC4-M5 connector.

A holder for the hex key (wrench) that fits the M3 screws on my MK3S (maybe MK3 too).It aligns with two pre-drilled/threaded holes in metal riser frame. I used two M3 screws from the “spares” bag.Handy since the printhead screws need that key to...

Created a foot for the middle of the Mk3S printer to reduce the side to side motion of the printer while still reducing the noise transfer with the squash balls. Print instructionsUsed the same blue dot squash balls and printed with PLA with a 15%...

originally designed for a raspberry camera v1 mount, but the if an arm with a hole for a m3 screw is useful for you - then here is your arm.remixed the arm of https://www.thingiverse.com/thing:2736439print this in pteg please, the printbed would be...

This is just a simple tool holder that you can mount on the top of your Prusa Printer to have them ready at all times. it's a remix of : https://www.printables.com/fr/model/30885-inbusallen-key-holder-for-prusa-i3-mk3sModeled in Fusion 360.

These are the custom parts reuired to convert an Anet A8 over to a prusa style hotend/extruder. - Motor mount with prusa style adjuster with endstop mount. ... - Z motor mounts that adjust the rod/threaad to the correct location (using the same top...