monoprice maker select plus upgrades 3d models

Mount your Monoprice Maker Select printer and Microsoft Lifecam (Studio or Cinema) webcam perfectly with this custom mount. Place it under the front edge, either centered or offset to fit your needs. Use the original screw from the camera mount for a...

The stock fan location on my Monoprice Maker Select V2 obstructs my view of the hot end, and it's also underpowered. I've designed a replacement that moves the fan out of the way with a 50mm blower and doesn't require any modifications to the...

Now I run my Monoprice Maker Select V2.1 at 228mm(x) by 214mm(y), using a 250mmx400mm glass bed clipped to stock bed. The top frame will need to be bent or cut in order to make this modification work. It works seamlessly with the Z-brace! (Check out...

Parts 3mm screws of appropriate length & 5015 Good Blower (12V for MonoPrice Maker Select V2) Use ABS although PETG ought to be fine. I designed a raft and support into the model and found it came right off without difficulty when using ABS. Use...

... - just mention the design. Print Settings: Printer: Monoprice Maker Select V2.1 Rafts: None Supports: Yes Infill: 20% Notes: Next time, I'll try printing this guide without supports to see if it reduces material usage.

I am creating a custom control box ramp for my Monoprice Maker Select 3D printer. To make it more accessible on my smaller workbench, I designed it to rise and angle upwards instead of using a faceplate mod that would require messing with the control...

Here's another Monoprice Maker Select V2 spool extender that I'm really pleased with! I couldn't find one that met my requirements when I was looking for it, but now I see a few options available. Maybe I just didn't use the right search terms...

The spool holder that came with my Monoprice Maker Select V2 was woefully inadequate for holding the spool I also obtained from Monoprice. Therefore, I designed a replacement that's properly proportioned to accommodate the spool. It securely fastens...

Hardware Requirements: 2 x M3x11mm bolts (or longer) 4 x M3 Washers 2 x M3 wingnuts or standard nuts/nyloc nuts Printer Settings: Monoprice Maker Select Printer: No raft layer is needed. - Supports are not necessary either. Resolution must be...

After my Monoprice Maker Select arrived, I was a bit let down to discover that the filament spool holder included with the printer wasn't large enough to accommodate a full-sized spool. With a 3D printer at my fingertips, the obvious solution was to...

This design is compatible with multiple printers, including the Wanhao i3 Duplicator, Cocoon Create, and Maker Select Plus and Wanhao i3 Duplicator Plus. Although it may not exactly replicate the original spool holder's appearance, it serves its...

Print Settings: Printer: Monoprice Maker Select i3v2 Rafts: No Supports: No Resolution: 0.2mm or better Infill: 100% Notes: Infill is 100% but it's small enough that I don't think infill settings will matter. Post-Printing: Make sure the spring has...

This duct was designed specifically for my MonoPrice Maker Select V2. It is a refined version of the stock cooler that comes with the printer, directing airflow directly at the nozzle and slightly around it. I've found it works perfectly for my...

I'm really impressed with this https://www.thingiverse.com/thing:1810943 case for my Pi, so I quickly created a remix to add a mount for my MP Maker Select V2. I carefully centered it as best I could. ...It looks and works perfectly thanks to an...

I aimed to lift my maker select V2 control box off its screws at the underside and onto some feet by designing this cradle that fits snugly around the bottom of the box, providing it with a better resting place. You'll need to print two of them using...

I currently own three custom cut glass build plates for my Monoprice Select v2 printer, each measuring 200x220. I needed a clean and easy place to store them out of the way. This is my first 100% custom, 100% functional design to solve a household...

So, I designed one that fits perfectly on top and hangs down the side (check out the photo).\nPrint Settings\nPrinter: \n Maker Select\n \n Rafts: \n Yes\n \n Supports: \n No\n \n Resolution: \n 0.2mm\n \n Infill: \n 10%\n \n Notes: \n It doesn't...

... ...By repositioning the drag chain at a 90-degree angle to the X-Rods, this upgrade ensures reliable performance and minimizes disruptions. ... This bracket is compatible with Cable Shrouds from Thingiverse: https://www.thingiverse.com/thing:2780667

I swapped out my original front Z-braces for rear braces, making it a lot easier to get prints off. I came across this design and fell in love with its simplicity: https://www.thingiverse.com/thing:2438817. Leveling my printer was a breeze thanks to...

Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple. add a sponge to the inside, made a world of difference for me, mine kept clogging halfway between prints 80% of the time and now its 100% fixed. be sure to...

This should also work with Cocoon Create or Wanhaou I3Plus as well. I wanted to install a fan duct that attaches through the rear side of the printer. The PCB was connected to one of the lower bearing blocks, so it had to be relocated. Ideally, it...

I needed brighter lighting for my printer, and my desk lamp was creating annoying shadows by pointing directly at it. I discovered some LED strips that could be wrapped around the edge of the printer frame, but the problem arose because the frame...

This is a versatile attachment that combines a protective sleeve and a sturdy mounting plate, designed specifically to be mounted securely on the right-hand side of your printer.

Thanks to the creator for making customization effortless! Customized version of http://www.thingiverse.com/thing:280974 Created with Customizer! ...http://thingiverse.com/apps/customizer/run?thing_id=280974 Instructions Using the following options: ...

I designed a blank version to achieve a cleaner look. ...Enjoy.

I was searching for a bracket positioned at the back so that the threaded rod doesn't stick out in front. I couldn't find one, so I decided to learn how to create things using Fusion 360 and came up with this design. I'm not sure if it works well or...

This will probably work with either the cocoon create or the wanhao I3Plus. This will give you a complete, unhindered view of the nozzle as it is printing from the front of your printer. To install this, you will need to relocate the PCB. Here is...

This is a sleeve case combined with a mounting plate to fit on the right side of the printer.

I encountered difficulties securing the back of my camera case, so I retrieved the original files for the Prusa i3 and imported them into this system. The following files comprise all the prints I've made that have proven successful for me. ...Special...

This sleek new shroud perfectly complements a standard 40mm x 40mm x 10mm fan. Securely attached to the heat sink using super glue, it provides an efficient cooling solution. The additional fan is wired in parallel with the existing cooler,...