micro swiss support 3d models

Micro Swiss All Metal Hotend Fan Duct Ender 3, when I put the Micro Swiss All Metal Hotend the fan duct I had it did not work because I was shocked in bed, so I shortened this Gabriel3DCaster design to which I am very grateful for his work I have...

I also uploaded one without the need for heat set inserts, if needed.I also uploaded my STEP file so people can easier amend the model to their printer models an needs.Printable without support.There is also a version vor the Ender 5 linear rails...

Decided to make a cooler that fits directly to the Micro Swiss DD bracket as I wasn't happy with the other designs I found. Bigger cooling nozzles in prototypes allow for the part cooling to flow and not have as much static pressure. Didn't do...

Straight forward wire management links for an Ender 3 V2 with a Micro-Swiss NG direct drive extruder. I provided the STP files so anyone can edit them to their liking.&nbsp;</p><p>&nbsp;</p><p>You will need a total of 10 links. I used zip ties to...

https://www.thingiverse.com/thing:4441076 mounting hole radius increased to 1.1mm from 1mm. ...4.5mm vertical extrude to fit micro swiss all metal hot end with sock, 1mm horizontal extrude to be closer to nozzle, fits well. ... Use original hardware.

Sensor mount for the Creality Sonic Pad that mounts on the right side of the Micro Swiss Direct Drive plate. Pretty easy to put on and take off. ...A few small zip ties secures the sensor to the bracket, then screw to the plate and calibrate.

This is a simple design to be able to install the hot end fan and the part fan on a new Micro Swiss Direct Drive. Since the original hard ware will not fit the new part, here is a solution. ... Just change the parts Fan Nozzle 4 mm and centered with the...

My adaptation of the Hero Me Gen 5 for a Micro Swiss Direct Drive mount on an Ender 5. Optional mount on the side for a BLTouch. Parts are designed to use M3 X D5.0 X L4.0 heat set inserts instead of pocketed nuts. I used the same inserts as most...

I redesigned a flexible extruder plate for the Wanhao I3 Plus printer, specifically tailored to work seamlessly with the Micro Swiss CNC Lever. ...The updated plate features a reduced shim distance of 0.5mm between the lever and the plate, resulting in...

This is a WIP (Work-In-Progress) conversion adapter for converting the TronXY X5SA (V-Channel) stock head and backplate with a Micro Swiss Direct Dual Drive Ender 5 kit. ... This adapter and backplate uses the original fans (Cold End fan and Blower...

BL-Touch/CR-Touch mounting brackets for the Micro Swiss NG Extruder and NG Revo Extruder installed on an ExoSlide motion system.The probe bracket for the regular NG Extruder is different than the NG Revo Extruder probe bracket so print the probe...

Here's a remix of the original thing from Thingiverse, tailored to fit my Micro-Swiss Direct Drive for Ender 3 Pro. To get my extruder aligned properly, I'm using an offset of X-45.15, Y-8.28, and Z-2.40. ... The mount I've chosen is available here:...

I was looking for a satsana fan duct but I was not able to find one able to satisfy my requirements: mounting on Micro swiss direct drive for ender 3, fitting BLtouch and using 2 noctua 4020 for hot-end cooling and part cooling. ...so I did my own yet...

I adore the BullsEye, however it didn't quite mesh with the Micro-Swiss Dual Gear Direct Drive, so I tweaked it slightly. ... The design was revised on April 18, 2020 to eliminate a tiny tab that obstructed the Plate (oops!).

This is the x axis cover and mount for the Voxelab aquila adapted to fit the 'Micro Swiss NG Direct Drive for ender 3' carriage. ... It has the same dimensions as the original cover, but is cut out so that the switch is exposed and the stepper motor...

Love this design not just for the clean look, but also for the compact size and weight which is fairly important for direct drive setups.I have made changes to make it fit the Micro-Swiss Ender 3 direct drive hot end setup for my Ender 3 V2 since the...

Love this design not just for the clean look, but also for the compact size and weight which is fairly important for direct drive setups.I have made changes to make it fit the Micro-Swiss Ender 3 direct drive hot end setup for my Ender 3 V2 since the...

By not having a separate thermal tube inside the cooling block, it allows for faster heat dissipation.The thermal heat break is made from Grade 5 Titanium Alloy to provide excellent thermal isolation between the heater and the cooling block.Titanium...

I recently picked up a Micro Swiss 300c Hot End, and the mount I had been using on the stock hot end no longer fits properly. I modified the STL file in Tinkercad to get a snug fit that works for me. If you experience any problems with this design,...

This takes @OpenDorrPolicy's adapter, which lets you mount the Ender 3 Max fan shroud on the Micro Swiss Direct Drive extruder plate, and adds a mount for a BLtouch probe, using the same L-bracket as would be used on the stock Ender 3 Max. You...

With the Micro Swiss direct drive extruder on the Ender-3 printer the Z-axis is somewhat reduced. ...With this cable chain mounts the cables and filament are running in front of the frame so you can achieve 200mm build height.The top and bottom parts...

... The Y component replaces the holder that normally secures the Y switch, while the X part slips over the new micro Swiss aluminium piece where the x limit switch makes contact - secure it in place with a small amount of super glue for stability.

I traced the Micro Swiss linear rail bracket from a photo after performing perspective correction on it, and it should be the correct measurements to make this work.The MS Linear Rail kit is quite a bit wider than the roller kit, or stock bracket, so...

This is a mount for those who want to use this fang (the reversed one) for Micro Swiss Direct Drive. Its made for Ender 5 but i suppose it fits the others to. Also room for a BLTouch https://www.thingiverse.com/thing:3091560/files And this file...

Made a simple bracket to manage the cables for the Micro Swiss Direct Drive one thing I needed to do was when mounting the bracket on the motor I had it more to the right of the motor so the cable would clear both upright post Update 12-26-2020: made...

I'd been relying on _3DDP_'s fan ring with my Ender 3 Pro, but after acquiring and installing a new Micro Swiss all-metal hot-end, the existing fan ring was no longer compatible due to the different offset of the nozzle. I transferred _3DDP_'s design...

I made this custom part for my Micro Swiss all metal hot end because I love the high clearance that the fang offers, but unfortunately, it wouldn't fit my brand new hot end. I printed mine at 0.2mm height with PETG and it turned out to be a very...

The stock BL Touch mount works seamlessly with the Micro Swiss direct plate, except when removing the fan cover becomes necessary due to any reason. In such cases, it's crucial to verify your z-offset since they employ the same screws. The MS mount...

I was using https://www.thingiverse.com/thing:4742800 with stock ender 3 v2 but upgraded to Micro Swiss NG direct-drive and hot-end. I wanted to reuse the endoscope holder I had already and just mount it to this fan shroud. ... This endoscope is...

This is an interface plate created for the Micro Swiss NG for use with the Wham Bam MUTANT V2. printed at 0.2 layer height. You will need 5 x 3 mm threaded inserts that come with the MUTANT kit Two versions available. Version A: ...