micro swiss support 3d models
754915 3d models found related to micro swiss support.
thingiverse
Update: A revised edition has been integrated, featuring a 7.5 mm offset modification to ensure seamless compatibility with the CR10 Pro. ... A modified iteration has been crafted, seamlessly accommodating the Micro Swiss all-metal hot end.
thingiverse
I modified original fan shroud designed by micro swiss company to accomadate my silent noctua axial fan as part cooling fan instead of noisy blower fan. ...I tested my ender 3 v2 and surface finish and bridging are satisfied.
thingiverse
Crafted a custom extruder knob specifically tailored to fit my micro Swiss direct drive extruder - and now it's in action, with the entire assembly moving in perfect harmony as I print.
thingiverse
Small modification to the CR touch bracket to allow use of the pan head screws that came with the CR touch rather than the flat head screws that the Micro-Swiss bracket is designed for.
thingiverse
This remix amplifies LDG92's refined fan duct design, tailored specifically for the standard Tevo Tornado fan configuration. ...By elongating the duct by 3mm, it accommodates the added length of the Micro Swiss all-metal hotend with precision.
thingiverse
Remixed https://www.thingiverse.com/thing:4131344 to fit a Micro Swiss hotend for my Longer LK4 Pro. All I did was widen the opening to fit. ... Just follow the same printing suggestions from the original version.
thingiverse
I modified the hero me gen 4 base to be compatible with the Micro Swiss Direct Drive, and it's functioning properly. ... v2 09/05/2020: I fixed a gap near the screws.
thingiverse
Ender 5 Plus Micro Swiss Direct Drive Palette Connector If you find it usful and would like to donate anything here is my PayPal https://www.paypal.com/biz/fund?id=QPA2FV7N6SRRC
thingiverse
A hot end bracket for the Micro Swiss Direct drive to attach cable/drag chain to on Ender 3/pro 3d printers. ...it works well with no loss of travel in the X axis
thingiverse
Englisch If you have upgraded your Vyper with a Micro Swiss extruder and need your filament holder above the printer, then the 45 degree adapter is now adapted to this extruder. ... You will need a M3 Screw and Nut
thingiverse
... printers. ...It merges the backplate from Akanar's design with Baird1fa's Micro Swiss direct drive adapter for Ender 5, requiring users to drill out one mounting hole since the combination was done in Cura by simply mashing these two designs together.
thingiverse
This is a remix of the Micro Swiss NG shroud https://www.thingiverse.com/thing:5358828 for use with a 4020 blower fan. So, it is fully compatible with CR10s Pro V1 & V2 fan's. I also modified the top right side of the shroud to place the...
prusaprinters
This new version makes it possible to use the full width of the X axis.The previous version* was touching the Z-axis motor.*https://www.prusaprinters.org/fr/prints/62934-prusa-mini-micro-swiss-all-metal-hotend-mount
thingiverse
I installed the Micro Swiss All Metal Hotend on my Ender 3 and initially encountered issues when I hastily assembled the fan duct. A sudden shock jolted me awake in bed, prompting me to revisit the Gabriel3DCaster design that I'm grateful for. To...
thingiverse
Fan shroud for the Micro Swiss NG Extruder for CR-10 V2 and CR-10 V3. SKU: M3206 Cooling Fan (Hotend): 4010 Cooling Fan (Part-Cooling): 5015 This fan shroud does not get in the way or affect of the normal CR-10 V2 / V3 probe mounts. The...
thingiverse
2 Adjusted Screw Hole Alignment, Added support wedges REV.1 Adjusted Thickness of clamp face and screw holes Files: -Custom_Nova_5015_Mount_Ezabl_Final_RTP -Clamp_For_Nova_Hotend This is A Custom mount to attach The Nova hotend to a Micro Swiss...
thingiverse
*Note:* This fan duct has been designed for the Ender 5 Micro Swiss direct drive hot end. I don't know if it can be used on any other model. #Description This is a remix of JeffrayMK Satsana dual 5012 fan duct...
thingiverse
I installed this on a customized Longer LK4 Pro (sort of an Ender 3 clone), hence it should fit any Ender 3 version that has been modified with a Micro-Swiss Direct Drive extruder, and probably other printers as well. I used standard 40x40mm...
thingiverse
Micro Swiss Direct Drive Extruder Only (part #M2602) or Micro Swiss Direct Drive Extruder and Hot End (part #M2601) Offset for my extruder: X= -46.00 Y= -9.00 Z= -1.75 to -1.90 (set to -1.65 for the initial till you can find your Z Offset) Fits...
thingiverse
I installed this on a customized Longer LK4 Pro (sort of an Ender 3 clone), hence it should fit any Ender 3 version that has been modified with a Micro-Swiss Direct Drive extruder, and probably other printers as well. I used standard 40x40mm...
thingiverse
Micro Swiss Direct Drive Extruder Only (part #M2602) or Micro Swiss Direct Drive Extruder and Hot End (part #M2601) Offset for my extruder: X= -48.5 Y= -8.5 Z= -1.75 to -2.10(set to -1.65 for the initial till you can find your Z Offset) Fits CR-10...
thingiverse
The Hero Me Gen5 system still lacks support for Micro Swiss extruders, so I'm opting to stick with this version for now. All other components (ducts, brackets) come directly from the original Gen4 setup. In addition to standard hardware, you'll...
thingiverse
... un hotend micro-microswiss avec le ventilateur d'origine de l'imprimante Creality CR-10s pro. ...Il peut être fixé avec les vis du ventilateur d'origine. Fanduct for micro-swiss hotend installed on Creality CR-10s pro. ...Don't need new screws.
thingiverse
The Micro Swiss end was initially set up for the original drag chain's end mount, while the bottom rail mount was designed for the new chain end. If you prefer both chains to use the same mounting type, you'll need to modify the Micro Swiss end to...
thingiverse
So I got my Micro Swiss direct drive and hot end upgrade but didn't like the cooler shroud that needed to be printed as it utilizes the single 40-10 part cooler fan. I wanted to increase my part cooling so i bought another 40-10 cooling fan and...
thingiverse
Product Links - Creality 42-40 Stepper Motor https://www.creality3dofficial.com/products/2pcs-ce-certification-2phase-reprap-stepper-motor-42-motor-42-40-3d-printer Micro Swiss - Bowden Dual Gear Extruder...
prusaprinters
This is an insert for the Swiss Army Style SD Holder ( https://www.thingiverse.com/thing:2801667 )This holder will hold two micro SD Cards, as well as my favorite RCM Jig (seen here: https://www.thingiverse.com/thing:2892320). the spaces to the left...
thingiverse
This is an insert for the Swiss Army Style SD Holder This holder will hold two micro SD Cards, as well as my favorite RCM Jig (seen here: https://www.thingiverse.com/thing:2892320). the spaces to the left of the micro sd card are for labels. ...the...
thingiverse
Print with supports. Hotend will need to be removed to install. the spacing for the fan mount was very far away, i added some blocks with holes cutout, i used a through-bolt with a nut. ill update with pics. i did 100% infill at .16 layer. ... update...
thingiverse
Video Instructions on How to Upgrade Micro Swiss Direct Drive for the Ender 3 - https://www.youtube.com/watch?v=8iAuBYfwLvg Here a link to the bltouch mount - https://www.thingiverse.com/thing:4644075 Donations Via Paypal are not necessary, but...