loading filament ender 3 v2 3d models

Ender 3 V2 filament sensor riser for dual gear extruder.I´ve used 4 M3x30mm bolts to fix the riser and the sensor to the mainframe.This was printed in PLA with a layer height of 0,28mm without supports.

... screwed it into the guide. I also tried to get everything to line up straighter and rub less on the screw guard Had to realign for the Ender 3 V2 With a MicroSwiss direct drive setup. ...Also allows for easy attachment of a filament runout sensor.

... one for the end) or the spool will not easily rotate when. Mounting nut (hex nut) should be tight. Print SettingsPrinter:Ender 3 V2 Rafts:No Supports:No Resolution:0.20mm Infill:0% Filament brand:Overture Filament color:black Filament material:PLA

I can confirm this works on an Ender 3 V2, if anyone wants to comment on if the part fits on the ender 3 or ender 3 pro, I imagine the part would fit but am unable to say for sure. Notes: I am unable to add the second part this was remixed...

... probe, so I had an endstop switch not in use. I remixed the Filament Roller Guide to add a support for the endstop switch and used as Filament Runout sensor. The endstop switch is from an Ender 3 V2, I don't know if it's the same for other Enders.

Filament-Rolle Halter für die Seite: (The Rocket - Side Spool Mount - Creality / Ender 3 (Pro/V2)) https://www.thingiverse.com/thing:4691695 Dazu dann die hier angebotenen Druckteile mit ein paar Unterstützungsrollen. Dazu ein 2,5 Loch an den...

At least for on my new Ender 3 v2 it was still not a tight fit and I could insert piece of 1.75mm filament between the guide and the filament holder metal bracket. The change I made is that I've made the hole 2mm shorter makeing it a really tight...

At least for on my new Ender 3 v2 it was still not a tight fit and I could insert piece of 1.75mm filament between the guide and the filament holder metal bracket. The change I made is that I've made the hole 2mm shorter makeing it a really tight...

Please find the free models here: https://www.printables.com/model/374779-ender-3-v2-dual-extruder-filament-guide-for-ptfe-t _____ Used the original filament Guide from Soda Surfer / RedSoda for 2 years and recently upgraded to a dual extruder. As my...

Because the others that are similar here generate "screech" noise when the filament passes and also generate dust from the filament that rubs against the extruder entrance and everything is dirty, all this was corrected for the ender 3 v2. This...

Because the others that are similar here generate "screech" noise when the filament passes and also generate dust from the filament that rubs against the extruder entrance and everything is dirty, all this was corrected for the ender 3 v2. This...

I have designed an entire replacement housing that incorporates all the features of this print as well as fixing the problem of the filament getting caught inside the housing:...

### **This now lives on [Printables](https://www.printables.com/model/347665-ender-3-v2-filament-guide-with-bowden-tube-support) and may not be up to date on Thingiverse** None of the existing filament guides I found were quite what I needed so I...

Made this for my Ender 3 V2 to top mount a Creality filament sensor. I used the original creality M3 screws for the filament sensor and then 2 M4 x 16mm screws for the swivel joint. You need to adjust the tension on the 2 screws so it positions it...

This is a mounting bracket for a BIGTREETECH Smart Filament Sensor/Filament Break Detection Module to fit to an Ender 3 v2 Printer adjacent to the extruder (although it will probably work for an Ender 3 and other Creality printers too). The bracket...

Remix of https://www.thingiverse.com/thing:5448871 The Ender 3 V2 Neo has a closed frame at the front, so I only adjusted the fit.

Remixed Tomaskom_cz's design to work with my Ender 3 V2 Neo. ...Slides into the top rail and is a little longer than the original design.

Ender 3/Pro/V2 Bigtreetech smart filament sensor adapter. After the direct drive update I couldn't find any good solution for the sensor location. This works perfect for me. And don't have to do any changes to the stoke spool holder.</p> <p>Note:...

Filament Runout Sensor Mount for the Ender 3 v2 using the TriangleLab Sensor. Print using 'normal' supports and possibly a skirt or brim for added adhesion. The support is only necessary for the wire clip/guide at the back of the mount. ...

Bracket to support the filament coming from a dryer placed next to the printer.For Ender 3 V3 KE.

After trying quite a few, this was one of the sturdiest filament rollers I could find for the Ender 3 V2 - so I remixed it to add a mount for my filament runout sensor too. Design is the same as the original, which attaches to the extruder via two of...

I printed out a Side Spool Holder for my Ender 3 V2 and realized my normal wheeled filament guide wouldn't cut it since the spool holder wasn't on the top anymore so came up with this simple guide that is mounted on the Z access screw guide using the...

Since I had upgraded my Ender 3 V2 to a direct drive extruder, the usual filament runout sensor mounts didn't fit. Had to design something to attach it to the extruder. Modelled in FreeCAD with my rookie skills.&nbsp;</p><p>No Support needed, Infill...

Fits on the stock Ender 3 V2 filament spool bracket. 0.20mm or smaller layer height suggested for bearings and threaded parts, the others can be larger layer height if desired. Orient parts on bed prior to printing. When assembling, leave...

I bought an SD reader from Amazon, to fit to my Ender 3 v2. I put rails on it, so it would sit on the left side of the base. I made it a fraction bigger to aid fitting the reader. Tightened/fitted by wrapping Masking tape around it. Also on here,...

Modified to fit on an Ender 3 v2. Added screw holes to secure the sensor with a nut or zip tie. Added a cutout for the sensor connector so sensor sits flush with the mount, at least for the one I recently purchased from TH3, TH3D V2 1.75MM Filament...

This Thing is a modification of Tekkins Alu Extruder V1.1 for the Ender 3 V2 I added the platform for the Filament Sensor and removed the Gateway to the Extruder, while i have the linear rail mounted. ... New STL Version: Moved the Sensor 3mm away...

... too thick and the Run-Out sensor kept coming loose. Re-designed and testing now. Picked up 4 M3 x30mm Hex Socket Head Cap Screws and Nuts (For Extra Security - Not Needed) M3 is the screw size for the bracket that is installed on my Ender 3 V2.

So this is a remix of a remix, with a very short arm that keeps the filament closer to the out-of-the-box feed path on the Ender 3 V2. It provides minimal guidance to ensure a clean vertical drop through my runout sensor and bottom roller guide. ... ...

A remix of Jack1961's Filament Guide and Runout Sensor Bracket: https://www.thingiverse.com/thing:3450311 This bracket fits an Ender 3 (standard, Pro or V2) and attaches using the existing screws on the Extruder assembly that connect it to the Z-Axis...