ender 5 filament holder 3d models

1008983 3d models found related to ender 5 filament holder.
Ender 5 filament holder for direct drive
Ender 5 filament holder for direct drive
thingiverse

Filament holder for ender 5 direct drive top mounted

Ender 5 plus Filament holder
Ender 5 plus Filament holder
thingiverse

This is a filament roller for Ender 5 plus. It fits using the original creality bracket. The bed will clear this and won't interfere with a tall print. I used the mount from thingiverse https://www.thingiverse.com/thing:3114139 by Skrutt84 to...

Ender 5 - Filament holder mount for smaller spools
Ender 5 - Filament holder mount for smaller spools
thingiverse

Fits spools with an inner diameter of 20 millimeters, making it compatible with the original nut. ...This setup is specifically designed for use with my FlashForge PLA printer on my Ender-5 machine.

Ender 5 Plus - Filament Holder Deluxe
Ender 5 Plus - Filament Holder Deluxe
thingiverse

Remix of Ender 3 - Filament Holder Deluxe (https://www.thingiverse.com/thing:3114139) for Ender 5 Plus (tried to upload it as remix, but Thingiverse is not able to find the original design) - I was happy with the original design that I have used on...

Ender 5 Pro Filament holder 80mm spools
Ender 5 Pro Filament holder 80mm spools
thingiverse

I really liked the original Filler, however the slide-in mechanism to attach the Filament Holder to my Creality Ender 3 was fairly wide. Also, my spool was quite far away from the metal Creality part on top of the extrusion. These two issues...

Ender 5 Filament Spool Holder Extension
Ender 5 Filament Spool Holder Extension
thingiverse

With the direct drive upgrade installed, I wanted the filament spool on top of the printer instead of on the side. At first I had it angled at the corner but it would collide with the extruder. So I made this extension to raise the spool higher so...

(rounded stopper) Creality (Ender 3, Ender 5) Filament holder 80mm spools
(rounded stopper) Creality (Ender 3, Ender 5) Filament holder 80mm spools
thingiverse

I have rounded the outer Stopper. ...It's only for the Optic. With this filament holder, the spool cannot slip down.

(rounded stopper) Creality (Ender 3, Ender 5) Filament holder 80mm spools
(rounded stopper) Creality (Ender 3, Ender 5) Filament holder 80mm spools
thingiverse

I have rounded the outer Stopper. ...It's only for the Optic. With this filament holder, the spool cannot slip down.

Ender 5 Pro Filament Holder Blocker to Stop Filament Roll Sticking on Arm of Holder
Ender 5 Pro Filament Holder Blocker to Stop Filament Roll Sticking on Arm of Holder
thingiverse

My filament on my ender 5 pro kept getting stuck on the holder arm, so I created this piece to fit on the filament holder and keep the filament roll away from the arm coming from the 3d printer.

Ender 5 / Ender 3 Filament Spool Holder
Ender 5 / Ender 3 Filament Spool Holder
thingiverse

Hi, I have an Ender 5 Pro and I hate the cheap flimsy filament spool holder that it comes with. I've had a look through Thingiverse but couldn't find anything I liked, so I've designed my own one. This is now a working design and in use on my...

Ender 5 Plus Filler Filament Holder
Ender 5 Plus Filler Filament Holder
prusaprinters

Updated compact version herehttps://www.printables.com/model/243318-ender-5-plus-filler-filament-holder-compact-update Filler filament holder resized to bolt onto Ender 5 Plus filament bracket with clearance for the hot bed. Need to drill 4x 4mm...

Ender 5 Plus Filler Filament Holder
Ender 5 Plus Filler Filament Holder
thingiverse

Filler filament holder resized to bolt onto Ender 5 Plus filament bracket with clearance for the hot bed. Need to drill 4x 4mm holes in the Ender 5 Plus bracket. Requires 4x M4 Nuts/Bolts and 2x 608 bearings. Link to Ender 5 Plus firmware config...

Ender 5 PLUS front filament holder
Ender 5 PLUS front filament holder
thingiverse

I modified my ender 5 plus to direct (stl: https://www.thingiverse.com/thing:4310609) and filament replacement at the front. Ptfe is deliberately split to make it easier to introduce the filament and to have less resistance to retraction. The...

Ender 5 Filament Runout Sensor Holder
Ender 5 Filament Runout Sensor Holder
prusaprinters

Two M4x10mm Screws and nuts are required to bolt the sensor to the holder Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.16mm Infill: 30% Filament: Amazon Basics PLA Black Notes: No need to put supports...

Ender 5 Filament Runout Sensor Holder
Ender 5 Filament Runout Sensor Holder
thingiverse

... well, I found [this](https://www.thingiverse.com/thing:3063430) awesome hybrid runout sensor. ...So I designed this bracket to hold the sensor in the same location as my old one. Two M4x10mm Screws and nuts are required to bolt the sensor to the holder

Ender 5 Plus / 3 / 3v2 Filament Holder
Ender 5 Plus / 3 / 3v2 Filament Holder
thingiverse

Since the filament holder faces the bed, I edited the Ender 3 holder from https://www.thingiverse.com/thing:3209211, by https://www.thingiverse.com/mjoaris. This will hold all 1kg filaments no problem. This is almost the same size as the stock Ender...

Ender 5 Plus Ball-Bearing Filament-holder
Ender 5 Plus Ball-Bearing Filament-holder
thingiverse

This is a Ball-Bearing Filament holder für Creality Ender 5 Plus (or maybe other models) for 1000g or less filaments with 52mm ID. You will need 2x 6204 Ball Bearings (closed) like this ones: ...

Ender 5 Plus Filler Filament Holder Compact Updated
Ender 5 Plus Filler Filament Holder Compact Updated
prusaprinters

Redesigned to be more compact, easier to print.Roller with bearings needs a bit of wriggling to force fit into guide.Filler filament holder resized to bolt onto Ender 5 Plus filament bracket with clearance for the hot bed. Need to drill 4x 4mm holes...

Ender 5 Plus Filler Filament Holder Compact Updated
Ender 5 Plus Filler Filament Holder Compact Updated
prusaprinters

Redesigned to be more compact, easier to print.Roller with bearings needs a bit of wriggling to force fit into guide.Filler filament holder resized to bolt onto Ender 5 Plus filament bracket with clearance for the hot bed. Need to drill 4x 4mm holes...

FILLER mINI MOD + Ender 5 Plus Filler Filament Holder
FILLER mINI MOD + Ender 5 Plus Filler Filament Holder
thingiverse

mINI mod for the whole thing so it could fit Ender 5 plus. Also made a new Creality Bolt holder to fit the horizontal bracket **EDIT I ADDED A ROLLER WITH A LIP PER A REQUEST FROM A USER I Include a stl to do a single Print everything is in an order...

ender 4/5 filament bearing holder up to 50mm spole
ender 4/5 filament bearing holder up to 50mm spole
thingiverse

Human being 16 precision ball bearings, four of them measuring 13 millimeters in diameter and 5 millimeters deep. A long metal rod called a shaft, with a diameter of 4 millimeters and a length of 50 millimeters, is also included. ...Furthermore, a small...

2.5 Kg Filament Holder Ender 3
2.5 Kg Filament Holder Ender 3
thingiverse

2.5 Kg Filament Holder for Ender 3. Printed with PLA. Use the standard Filament Holder Hose and put it in the printed Hose. Glue the side Part and the Hose togehter. Put the side Part and the Stand togehter. When needed glue it. ...Have Fun

TriangleLab Filament Sensor Holder Ender 5
TriangleLab Filament Sensor Holder Ender 5
thingiverse

The default mounting of the TRIANGLELAB FILAMENT SENSOR was very bad for the default position of the Ender 5 extruder. This fixes the offset. This can be used with my other filament guide for a straight path to the extruder. You can mount the...

2nd Filament holder for Ender 5 S1
2nd Filament holder for Ender 5 S1
thingiverse

This bolts to the side of the ender 5 s1 just under the OE filament detector, and a 2nd bowden tube connects to the top and filament is fed from the bottom. I made the bottom filament hole funnel shaped so it easily feeds right in to the bowden tube....

ø20mm filament holder, Creality Ender 5 Pro
ø20mm filament holder, Creality Ender 5 Pro
thingiverse

... to make a quick solution for it. ... This will plug into the existing reel holder. Also made a holder to replace the stock one, it will twistlock as the original. See pictures. ... If you happen to need longer, shorter or other changes I can assist.

Filament holder bolt for Ender 5 Pro
Filament holder bolt for Ender 5 Pro
thingiverse

Hugo Groeneveled designed a great filament holder that uses skate bearings to get a nice smooth roll which gives you a much better feed to your extruder. He did not make the bolt part that would fit my Ender 5 Pro. This one will do that. I am...

Filament Holder for Creality Ender 5
Filament Holder for Creality Ender 5
thingiverse

This holder sits very tight on the rack for the filament spool. I printed it in PLA which is very brittle but it didnt break. I recommend some plastic, that is more elastic than PLA. Also my supports sticked too good in the inside of the...

Filament Runout Sensor Holder - Ender 5 Pro
Filament Runout Sensor Holder - Ender 5 Pro
thingiverse

... in. Also need to print one of these: https://www.thingiverse.com/thing:5382780 Sensor: https://www.amazon.com/dp/B09DCMMGJ1?psc=1&ref=ppx_yo2ov_dt_b_product_details I can move it up and down the bar for easier unloading/reloading filament. ...

Ender 5 Pro Filament Guide Roller & Filament Holder
Ender 5 Pro Filament Guide Roller & Filament Holder
thingiverse

... The original filament spool holder had to be turned toward the back to line up properly and I had to rotate the printer every time I changed the filament so I redesigned this to eliminate the post and now the spool simple sits on the two rollers.

Filament holder for ender 5 (plus) - Centred bearings
Filament holder for ender 5 (plus) - Centred bearings
thingiverse

Filament holder This filament holder is designed because I wanted a filament holder where the bearings are put on the rotation axis and where multiple sizes of spools would fit on. It runs really smoothly and keeps the spools rotation axis perfectly...