ender 3 v2 raspberry pi mount 3d models

Remix for this model:Ender 3 s1 pro mountYou can use this piece to add an articulating system to your ender 3 s1 pro, I personally use it for mounting an articulating arm with a camera on top.A filet for the holes so it's easier to print, video also...

I built this dock specifically for my raspberry pi, which is already encased in a protective housing and running octoprint. The dock can be easily positioned on either side of the printer and neatly slots into place within the 40x40 aluminum...

... I did was shift them down. I've printed and tested both versions with a Pi 3 B, a Pi 3 B+, and a Pi 4 and can confirm that all three fit perfectly. ...It takes a little wiggling to get all the ports to pop in, but once they do they're nice and snug.

This is a remix of Harryb1991's RPI4 case with added rails for Ender 3 and CR-10

Remixed from (used the slots to fit into extrusions) https://www.thingiverse.com/thing:4751688 I already had a case for my Raspberry Pi that I Knew fit perfectly so I designed this little caddy that sits in the extrusion slots and supports the pi on...

None of the existing Raspberry Pi stations I found included accommodations for fans, proper airflow, camera cables, the USB port, either HDMI port or the audio jack. This design aims to address all of those issues. The base clips to the existing...

For Raspberry Pi 4B. I couldn't fine one with rails, so I remixed this in Tinkercad with https://www.thingiverse.com/thing:4176051 I had to make the top taller to avoid needing supports, so there is a little gap between the front i/o and the case. ...

Remix from the `upperpart_V2_30mm.stl` file without any other holes than the fan one.

Remix and add the honeycomb all the way across the design to enclose the fan. This adds a more clean look. I used this fan and it fits tight enough that you do not need to use screws to hold the fan in place. ... ...

I adjusted the number of ports available, also lowered the PI location so that I could add a mount for the fan. I also added posts for a Buck Converter. **Note: I have not printed this yet, and its a work in progress. ...Print at your own risk**

I encountered difficulties with the initial design and ended up cracking the bottom section during the installation process of the Pi. ...In response, I modified the layout somewhat - the enclosure is significantly simpler to put together now.

This is a mount that will allow you to use a Raspberry Pi 3B/3B+ with the UCTRONICS 3.5 inch touch screen mounted to your Ender 5 / Ender 5 Pro / Ender 5 Plus printer. There are 2 different mounts. ...One with the option of using a 4010 cooling fan.

A simple, adjustable holder for the Yi-Home Cam or the Raspberry Pi Cam on the Creality Ender-3 S1 Pro. ... Screws you need: To assemble the holder: 2 x M3x18mm 1 x M3x10mm 3 x M3 Nuts To mount on the Ender-3 S1 Pro: Original Ender-3 S1 Pro Screws

A simple, adjustable holder for the Yi-Home Cam or the Raspberry Pi Cam on the Creality Ender-3 S1 Pro. ... Screws you need: To assemble the holder: 2 x M3x18mm 1 x M3x10mm 3 x M3 Nuts To mount on the Ender-3 S1 Pro: Original Ender-3 S1 Pro Screws

To reduce plastic waste accumulation within the case, minimizing port openings was essential. ...Additionally, opting for LM2596 mounts sans fan was a key consideration.

Raspberry Pi Camera V2 Mount for Ender 3 v2 3D printer.Parts are designed to be 3d printed and snap together.Assembly:Install the Raspberry Pi camera onto the mounting plate by pushing the two tabs inward, slightly bowing the part into a U shape. The...

Raspberry Pi Camera V2 Mount for Ender 3 v2 3D printer.Parts are designed to be 3d printed and snap together.Assembly:Install the Raspberry Pi camera onto the mounting plate by pushing the two tabs inward, slightly bowing the part into a U shape. The...

Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.02mm Infill: 25% Filament: Hatchbox PLA Notes: Infill doesn't matter very much. Design is mostly solid. Print in given orientation. ... ...

Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.02mm Infill: 25% Filament: Hatchbox PLA Notes: Infill doesn't matter very much. Design is mostly solid. Print in given orientation. ... ...

This is a custom bracket that holds the ender 3 s1 display with an integrated raspberry pi 3(b) case. This has a 3 screw mount that uses the stock 3 screws and replaces the stock display mount bracket on the ender 3 s1. Use 4 m2x10 or m2x14 screws...

Remix of this to fit a Pi 5's slightly different IO. My modelling skills are weak, tolerances could be better, etc etc. ...But it works.

https://www.thingiverse.com/thing:4441076 Added camera cable cut out to case. ... I used supports when for camera slot since the tolerance is tight.

Remixed from https://www.thingiverse.com/thing:4192636 to place the Pi on its side so as to take up less space. Also removed some of the port holes next to the power cable. ... Re-mixed in TinkerCad.

2020_Pi_Cam_Mount Description: A versatile Raspberry Pi camera mount designed to work seamlessly with 2020 extrusions. This pivoting mount allows for effortless adjustments and optimal camera positioning. Updates: 2020_Pi_Cam_Base-V2.00 (New,...

Raspberry Pi 3/3B+ Case Designed to be printed in one seamless piece, with no support material required when oriented vertically. This is a straightforward remix of the original design for those who need a non-mountable version. Glides smoothly in...

Install a Raspberry Pi camera on your Ender 3 printer's bed handle using an M3 bolt to secure the holder to the frame.

A mount for a Rasperry Pi ZeroW. Feel free to modify the Fusion 360 file if you want add or edit something. ... You need: - 4x M3x5mm - 4x M3 bolt

Raspberry Pi 3/3B+ Case Mount this case with ease: https://www.thingiverse.com/thing:3433168 This innovative design prints in one piece, eliminating the need for support material when oriented vertically. As a remix of the original, it offers an...

However, I wanted to use a Raspberry Pi Case that fits under the control box of the Ender 3, which is this one: [Ender 3/Cr-10 Raspberry Pi Case with PiCam Slot](https://www.thingiverse.com/thing:3026059) Since these two designs weren't compatible, I...

SOURCES USED: https://www.thingiverse.com/thing:5330674 https://www.thingiverse.com/thing:5588625 https://www.thingiverse.com/thing:3160367 This is a mount for an Ender 3 S1 for any camera with a normal 1/4 screw hole with a case for a 2015 Raspberry...