ender 3 v2 filament not feeding 3d models

Please find the free models here: https://www.printables.com/model/374779-ender-3-v2-dual-extruder-filament-guide-for-ptfe-t _____ Used the original filament Guide from Soda Surfer / RedSoda for 2 years and recently upgraded to a dual extruder. As my...

Im running jyers ui to enable filament run out sensor in my ender 3 v2. This wont work with previous enders unless youve updated mother board to v4.4.2 or v4.4.7 as these newer boards have port to plug switch into. Great video on jyers firmware (not...

#BTT Filament sensor bracket for Ender 3 v2# ## by DAR01. This is a mounting bracket for a BIGTREETECH Smart Filament Sensor/Filament Break Detection Module to fit to an Ender 3 v2 Printer adjacent to the extruder (although it will probably work for...

I have designed an entire replacement housing that incorporates all the features of this print as well as fixing the problem of the filament getting caught inside the housing:...

This is a secondary spool holder for an Ender 3 V2 printer. This replaces the nut on the spool holder that comes with the printer. Printing: I printed mine with supports on the inside just to help the ears print correctly. ... Do not change the...

Made this for my Ender 3 V2 to top mount a Creality filament sensor. I used the original creality M3 screws for the filament sensor and then 2 M4 x 16mm screws for the swivel joint. You need to adjust the tension on the 2 screws so it positions it...

Remixed Tomaskom_cz's design to work with my Ender 3 V2 Neo. ...Slides into the top rail and is a little longer than the original design.

Remix of https://www.thingiverse.com/thing:5448871 The Ender 3 V2 Neo has a closed frame at the front, so I only adjusted the fit.

A remix of Jack1961's Filament Guide and Runout Sensor Bracket: https://www.thingiverse.com/thing:3450311 This bracket fits an Ender 3 (standard, Pro or V2) and attaches using the existing screws on the Extruder assembly that connect it to the Z-Axis...

Filament Runout Sensor Mount for the Ender 3 v2 using the TriangleLab Sensor. Print using 'normal' supports and possibly a skirt or brim for added adhesion. The support is only necessary for the wire clip/guide at the back of the mount. ...

Ender 3/Pro/V2 Bigtreetech smart filament sensor adapter. After the direct drive update I couldn't find any good solution for the sensor location. This works perfect for me. And don't have to do any changes to the stoke spool holder.</p> <p>Note:...

Bracket to support the filament coming from a dryer placed next to the printer.For Ender 3 V3 KE.

A remix of Jack1961's Filament Guide and Runout Sensor Bracket: https://www.thingiverse.com/thing:3450311 This bracket fits an Ender 3 (standard, Pro or V2) and attaches using the existing screws on the Extruder assembly that connect it to the Z-Axis...

... suggestions or anything else regarding the design. I printed it and it is installed on my Ender 3 V2 printer and working. ...I uploaded the SolidWorks part files and STEP files too in case you want to use the CAD model or STEP files to do a re-mix.

I bought an SD reader from Amazon, to fit to my Ender 3 v2. I put rails on it, so it would sit on the left side of the base. I made it a fraction bigger to aid fitting the reader. Tightened/fitted by wrapping Masking tape around it. Also on here,...

After trying quite a few, this was one of the sturdiest filament rollers I could find for the Ender 3 V2 - so I remixed it to add a mount for my filament runout sensor too. Design is the same as the original, which attaches to the extruder via two of...

Since I had upgraded my Ender 3 V2 to a direct drive extruder, the usual filament runout sensor mounts didn't fit. Had to design something to attach it to the extruder. Modelled in FreeCAD with my rookie skills.&nbsp;</p><p>No Support needed, Infill...

I printed out a Side Spool Holder for my Ender 3 V2 and realized my normal wheeled filament guide wouldn't cut it since the spool holder wasn't on the top anymore so came up with this simple guide that is mounted on the Z access screw guide using the...

Remix of the Filament holder and cleaner by dcarchitecturaldesignoffice to support 1/8" bowden tube fitting for bowden feeding for ender 3/pro/V2 extruder. Included files for both internal and external 1/8" thread. Also included files from...

... the sensor. currently printing now. will make changes if needed and update. if you click the thingiverse link above you will see what kind of extruder i have. Printed on and for the Ender 3 V2. v2 is the updated one and will work perfect. ...

* If you want to print with cap, use the files Ender_3_V2_-_Runout_Sensor_Base.stl and Ender_3_V2_-_Runout_Sensor_Cap.stl, if not, use only the file Ender_3_V2_-_Runout_Sensor.stl. * If you use stock firmware, probable you will need to update it...

This Thing is a modification of Tekkins Alu Extruder V1.1 for the Ender 3 V2 I added the platform for the Filament Sensor and removed the Gateway to the Extruder, while i have the linear rail mounted. ... New STL Version: Moved the Sensor 3mm away...

Mount for filament runout sensor on ender 3 for direct drive when the extruder stepper is moved from the stock location

All the parts needed for ender 3 v2 cable managment with chain links, i remixed multiple models i found online to make what for me was an optimal setup with the least amount of tikering of the printer parts

Support only for outer ring is recommended. Includes 2 holes for original screws from K1 filament sensor mountAlso has hole for mounting this to custom X stepper cover...

BOM: * 1x U-Slot Pulley Ball Bearing U604ZZ * 1x M4x16 Screw Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 33% Filament brand: Gembird Filament material: PLA

BOM: * 1x U-Slot Pulley Ball Bearing U604ZZ * 1x M4x16 Screw Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 33% Filament brand: Gembird Filament material: PLA

This filament guide is a remix from: https://grabcad.com/library/creality-ender-3-filament-guide-and-z-axis-lead-screw-stabilizer-1 I used in combination with Dual Bearing Filament Guide for Ender-3 and CR-10(S) by klingler...

This is for the Ender 3, Ender 3 Pro, Ender 3 v2. It will allow the sensor to mount on the back in front of the extruder. I didn't find a bracket that mounted at the right height. And most of the sensor brackets required lot of support. I designed...

I did this new version for all people using Ender 3 v2 Dual Chain Mount https://www.thingiverse.com/thing:4569500 The original version is developed to use without the DCM which leads to a no fit in Extruder direction. The new version is extend by...