ender 3 max direct drive 3d models

1138614 3d models found related to ender 3 max direct drive.
Ender 3 Max Direct Drive
Ender 3 Max Direct Drive
thingiverse

I made this for the Ender 3 Max. Easy Print no supports needed. The max already has a nice base on top for the motor. So I made a bracket to covert to direct drive. I moved the stop sensor over to not hit side rails. May also fit ender 3 and CR 10...

Ender 3 Max Direct drive
Ender 3 Max Direct drive
thingiverse

Direct drive for the Ender 3 Max There are 2 carriage styles, one with a Bowden tube connector (recommended) and one without a tube connector. (Original carriage file from here, https://www.thingiverse.com/thing:5191840). I modified 40x40x20...

Ender 3 Max direct Drive
Ender 3 Max direct Drive
prusaprinters

The model is from a user on thingiverse that i remade, i liked the logic behind it and it was pretty easy, but i wanted something to use with the stock EVERYTHING because i'm an asshole and do not want to spend money XD, i also moved the filament...

Ender 3 Max Direct drive V4
Ender 3 Max Direct drive V4
thingiverse

The final V4 can still do with a bit of refining, but it works just great and my Ender3 Max is quite happy printing in the direct drive configuration, There is enough clearance for the filament release, even at max height although the cables rub a...

Ender 3 Max Direct Drive Bracket
Ender 3 Max Direct Drive Bracket
thingiverse

... DUAL GEAR Extruder. Based on TR01234's measurement, I have added a version for E3MAX extruder. Mar-03-2022, Finalize the E3Max direct drive bracket with extra support (use the original roller wheel's nut and bolt) to strengthen the bracket.

Ender 3 Max Direct-drive Extruder & Fan-duct
Ender 3 Max Direct-drive Extruder & Fan-duct
thingiverse

This is a direct drive extruder mount/bracket and fan duct for an ender 3 Max

Ender 3 Max Direct Drive bracket for BMG extruder
Ender 3 Max Direct Drive bracket for BMG extruder
thingiverse

Direct Drive extruder bracket for use with a [BMG](https://www.bondtech.se/product/bmg-extruder/) (be wary which one you have, i.e which side the filament release lever is on) extruder on an [Ender 3...

Ender_3_MAX Direct drive plate (linear rollers)
Ender_3_MAX Direct drive plate (linear rollers)
thingiverse

This is my first attempt at a 3d model so be gentle. ...I needed a direct drive plate for my Ender 3 Max and the ones for my ender pro couldn't hit the end stop. So that gave birth to this nifty little plate. ...

Ender 3 MAX + Direct Drive Upgrade Cable Chain Kit
Ender 3 MAX + Direct Drive Upgrade Cable Chain Kit
thingiverse

**Instructions:** ADD LATER Credits: **Z axis links, covers, and bottom mount:** https://www.thingiverse.com/thing:3491926/ **Direct drive upgrade extruder mount:** https://www.printables.com/model/278647-cable-chain-kit-for-ender-3 **Extruder...

Ender 3 max Direct Drive Bracit V2
Ender 3 max Direct Drive Bracit V2
thingiverse

I ma not sure if HKFEVER made a file for the stock extruder, but this is for the stock extruder on the E3MAX.

Ender 3 max microswiss direct drive
Ender 3 max microswiss direct drive
thingiverse

I could not find any ender 3 max fan shrouds, and stubled on to one, but the mounting brackets kept breaking off. I fixed this issue so enjoy. here is also another design with ABL in front. ...https://www.thingiverse.com/thing:5735922

Ender 3 Max Direct Drive Conversion Filament Breakage and Spool Brackets
Ender 3 Max Direct Drive Conversion Filament Breakage and Spool Brackets
thingiverse

Designed this to better accommodate my Direct drive upgrade. Printing: Printed horizonal on a raft with default 2.0 Cura settings and PLA. ...

Ender 3 Max Stock Direct Drive with Filament Sensor for Hero Me Gen 6
Ender 3 Max Stock Direct Drive with Filament Sensor for Hero Me Gen 6
thingiverse

Currently untested remix of Ender 3 Max Direct Drive brackets using stock extruder parts, fitted for use with Hero Me Gen 5/6 Updated to V2 with increased wheel clearances and slotting for the threads protruding from the back of the carriage plate

Ender 3 Max titan Extruder direct drive
Ender 3 Max titan Extruder direct drive
thingiverse

This is a ender 3 max mount to give the ability to have direct drive with titan extruder s and any extruder that has the Bowden tube connecter on the right-hand side and will give you a good strait path to the hot end and will work with any hotend.

Ender 3 Max Micro Swiss Direct Drive Stock Fan mount w/CR or BL Touch
Ender 3 Max Micro Swiss Direct Drive Stock Fan mount w/CR or BL Touch
thingiverse

I needed a mount for stock fan on my Ender 3 Max for the Micro Swiss Direct drive extruder. holmes4 had one listed for a BL Touch but the mounts didn't line up. But I'd like to thank him for the inspiration. I have a CR Touch and I wanted it on the...

SATSANA Ender 3 Max Remix - Micro Swiss Direct Drive (No Probe)
SATSANA Ender 3 Max Remix - Micro Swiss Direct Drive (No Probe)
thingiverse

Remixed from - Satsana dual fan remix by BobanaPirate to fit on my Ender-3 Max with the Micro Swiss direct drive extruder. Changes made: removed the clip that held the cables up above the fan shroud because it interfered with the direct drive...

SATSANA Ender 3 Max Remix - Micro Swiss Direct Drive With BL-Touch Mount
SATSANA Ender 3 Max Remix - Micro Swiss Direct Drive With BL-Touch Mount
thingiverse

Remixed from SATSANA Ender 3 Max Remix - Micro Swiss Direct Drive (No Probe) I added a stabilized mount for a BL-Touch ABL with space for the fans so you can print it all in one and have it neat and flush.

4234 Direct Drive - Ender 3 Max
4234 Direct Drive - Ender 3 Max
thingiverse

I used a full metal extruder with capricorn tube . the fitting will fit thru mount and allow the tube locks to be used but they are not really needed if tube is cut right. I noticed some flex on the first version so I made it a little thicker. ...

GXS  BMG Direct Drive Mount for Ender 3 Max
GXS BMG Direct Drive Mount for Ender 3 Max
thingiverse

(after redesign) -direct drive https://youtube.com/shorts/yWI2Fl7eWQI GXS Custom Direct Drive Mount V4 - (ender 3 max)- 3d Print - time lapse https://youtu.be/LydY9y1WzYA Benchy on GXS Custom BMG Direct Drive Mount V3 - (ender 3 max)- 3d Print -...

Ender 3 Max Filament Sensor Suport for Direct Drive Upgraded Machines
Ender 3 Max Filament Sensor Suport for Direct Drive Upgraded Machines
thingiverse

After upgrading my Ender 3 Max with the Direct Drive adapters provided in https://www.thingiverse.com/thing:5175330 I felt a new filament sensor support would be a great complement. Layer = 0.3mm, 4 Walls, Infill doesn't matter (using 4 walls). ... ...

 Ender 3 Max Shroud Adapter and PTFE Bracket for Micro Swiss Direct Drive
Ender 3 Max Shroud Adapter and PTFE Bracket for Micro Swiss Direct Drive
thingiverse

Fan Shroud Adapter and PTFE Guide Tube Bracket used to install the Micro Swiss Direct Drive Extruder kit on an Ender 3 Max. ... The PTFE bracket will align the PTFE tube with the Ender 3 Max filament runout sensor.

Ender 3 Max Fan Shroud with BL Touch Mount with Micro Swiss Direct Drive Extruder and Hot End
Ender 3 Max Fan Shroud with BL Touch Mount with Micro Swiss Direct Drive Extruder and Hot End
thingiverse

I recently purchased an Ender 3 Max (absolutely in love with this unit), and wanted to upgrade the hot end and extruder with the intention of configuring this unit for printing parts with carbon fiber infused nylon. In order to print with this...

Ender 3 direct drive
Ender 3 direct drive
thingiverse

In addition to improved print quality, the Ender 3 Direct Drive Extruder Bracket offers several other advantages. It is designed to work seamlessly with the Creality Ender 3's existing extruder motor, eliminating the need for any additional power...

Ender 3 direct drive
Ender 3 direct drive
thingiverse

Direct Drive Upgrade for Ender 3 Simplified. This setup leverages the BMG mini and a pancake stepper, both of which are readily available on AliExpress. ... https://www.aliexpress.com/item/4000595773435.html...

Ender 3 Direct Drive
Ender 3 Direct Drive
thingiverse

Teaser for a custom-built direct drive extruder design tailored specifically for my Ender 3 printer. Objective is to leverage all stock extruder components, printed parts, and standard hardware without compromising print volume or introducing...

Ender 3 Direct Drive
Ender 3 Direct Drive
thingiverse

Apart from 2 M3x20 screws, this is a fully 3D printable conversion of the Ender 3 to Direct Drive extruder fitting with the BullsEye fan duct. After printing the parts from the original thing, I realized that it was not rigid enough and the stepper...

Direct Drive Ender 3
Direct Drive Ender 3
grabcad

Direct Drive Ender 3 with Bondtech gear extruder. With thanks to Vas Parshin for the Bondtech extruder design.The positioning of the extruder steppenmotor is turned 90º. ...This way the motor is better supported than with the motor facing to the...

Ender 3 Direct drive.
Ender 3 Direct drive.
grabcad

Modify your Ender 3 printer into a direct drive printer.You only need a new bracket and a longer connecting motor cable.Because of this modification aware that the build heigth of your printer is about 50mm lower. For that you can use two profile...

Ender 3 Direct Drive
Ender 3 Direct Drive
cults3d

Teaser for a direct drive extruder design for the Ender 3 I'm working on. Goal is to use all stock extruder parts, printed parts, and standard hardware only, not to loose any print volume, and have as little overhang as possible. I meanwhile have...

Ender 3 Direct drive
Ender 3 Direct drive
thingiverse

Motor support for stock extruder is fully implemented with direct drive functionality.